Prestige 642 PPPoE Modem

4.3.2 Set Related CI Commands — Examples

Set Mpoa Mux Command

•The set mpoa mux command configures the multiplexing type for a remote node. The multiplexing type “vc” is configured for virtual circuit (remote node) 0, in the example shown next.

P642ME-13> set mpoa mux vc 0

Syntax:

P642ME-13> set mpoa mux <VCLLC> <VC#>

where <VCLLC> are types of multiplexing and <VC#> is the virtual circuit (remote node) number. The “<>” brackets specify a required field.

Set Mpoa VPI Command

•The set mpoa vpi command allows you to change the VPI (Virtual Path Identifier) for a virtual circuit (remote node). To set the VPI to 22 for virtual circuit (remote node) 0, see the example shown next.

P642ME-13> set mpoa vpi 22 0

Syntax:

P642ME-13> set mpoa vpi <value> <VC#>

where <value> is the VPI number and <VC#> is the virtual circuit (remote node) number.

Set PPP Password Command

•The set ppp password changes the PPP/PPPoE password of a remote node. To set the password to 12345678 for remote node 0, see the example shown next.

P642ME-13> set ppp password 12345678 0

Syntax:

P642ME-13> set ppp password <xxxxxxxx> <VC#>

where <xxxxxxxx> is your new password and <VC#> is the virtual circuit (remote node).

Set Baudrate Command

•The set baudrate command changes the console port speed to one of the following predefined baudrates: 9600, 19200, 38400, 57600 or 115200. In the example shown next, the console port speed is configured to 9600.

P642ME-13> set baudrate 9600

Command Line Interface

4-5