Prestige 642 PPPoE Modem

configure a different application not already pre-configured, choose Manual and then enter the port number in the Port Number field.

Figure 3-12 Advanced Setup — NAT Applications ScreenTable 3-8 Advanced Setup — NAT Applications Screen Description

APPLICATION

FIELD DESCRIPTION

Application

This READ-ONLY field is preset to Default and cannot be changed. Default mans that

 

all incoming packets will be transferred to the server IP address you enter in the Server

 

IP Address field. Refer to the table shown next for a list of different applications.

Port Number

This READ-ONLY field is preset to ALL ports and cannot be changed. All ports means

 

that your Prestige supports all ports. Refer to the table shown next for a list of different

 

ports.

 

 

Server IP Address

Type in the server IP address of your computer here.

 

 

When you have finished, click Apply to save these settings back to the Prestige or Reset to reset the fields in this screen.

3-16

Web Configurator