Prestige 642 PPPoE Modem

Chapter 4

Command Line Interface

This chapter shows you how to configure and maintain your Prestige using the command line interface.

The command line interface is an alternate way to configure the Prestige. If you want to configure your Prestige with the (more user-friendly) web configurator, refer to the previous chapter.

4.1Getting Started

4.1.1 Initial Screen

When you turn on your Prestige, it performs several internal tests as well as line initialization. After initialization, press [ENTER] to continue, as shown next.

Copyright (c) 1994 - 2001 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:a0:c5:01:23:45

HWSAR

(FPGA)

: programming

(11969) ...

done

HWSAR

(FPGA)

: testing ...

done

 

Wan Channel init ........

done

 

Loading ADSL

modem F/W

 

 

.................................................. done

Press ENTER to continue...

Figure 4-1 Power-On Display
4.1.2 Entering A Password

The login screen appears after you press [ENTER], prompting you to type in your password, as shown next.

Enter Password : XXXX

Figure 4-2 Login Screen

For your first login, enter the default password (1234). As you type the password, the screen displays a (X) for each character you type.

Command Line Interface

4-1