Prestige 642 PPPoE Modem
Type a location for storing the configuration file or click Browse to look for one.
Choose the Xmodem protocol.
Then click Receive.
Figure 5-2 Backup Configuration Example
After a successful backup you will see the following screen. Enter “atgo” to restart the system.
Total 16384 bytes received.
Erasing..
....
OK
Figure 5-3 Completion of Prestige Backup
5.3Restore Configuration
This section shows you how to restore a previously saved configuration to the Prestige and upload a configuration file. Note that this function erases the current configuration before restoring a previous back up configuration; please do not attempt to restore unless you have a backup configuration file stored on disk.
FTP and TFTP are the preferred methods for restoring your current computer configuration to your Prestige since FTP and TFTP are faster. Please note that you must restart the system after the file transfer is complete.
5.3.1 Restore Using FTP or TFTP
Follow the instructions as shown in the next screen. For details about backup using (T)FTP please refer to later sections on FTP and TFTP file upload in this chapter.
Step 1. Launch the FTP client on your computer.
Step 2. Enter “open”, followed by a space and the IP address of your Prestige.
Firmware and Configuration File Maintenance |