Prestige 642 PPPoE Modem

Step 6. Use “get” to transfer files from the Prestige to the computer, for example, “get rom-0 config.rom” transfers the configuration file on the Prestige to your computer and renames it “config.rom”. See earlier in this chapter for more information on filename conventions.

Step 7. Enter “quit” to exit the ftp prompt. Step 8. Enter “atgo” to restart the Prestige.

331 Enter PASS command Password:

230 Logged in

ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 5-1 FTP Session ExampleThird Party FTP Clients

The following table describes some of the commands that you may see in third party FTP clients.

Table 5-2 General Commands for Third Party FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to the

 

server for anonymous access. Anonymous logins will work only if your

 

ISP or service administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

 

Initial Remote Directory

Specify the default remote directory (path).

 

 

Initial Local Directory

Specify the default local directory (path).

 

 

Firmware and Configuration File Maintenance

5-3