Chapter 12 Maintenance
The following table describes the labels in this screen.
Table 43 Maintenance > General
LABEL | DESCRIPTION |
Administrator | Type how many minutes a management session can be left idle before the |
Inactivity Timer | session times out. The default is 5 minutes. After it times out you have to log in |
| with your password again. Very long idle timeouts may have security risks. A |
| value of "0" means a management session never times out, no matter how long |
| it has been left idle (not recommended). |
|
|
Apply | Click Apply to save your changes back to the WAP3205. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
12.4 Password Screen
It is strongly recommended that you change your WAP3205's password.
If you forget your WAP3205's password (or IP address), you will need to reset the device. See Section 12.8 on page 111 for details
Click Maintenance > Password.Figure 76 Maintenance > Password
The following table describes the labels in this screen.
Table 44 Maintenance > Password
LABEL | DESCRIPTION |
Password Setup | Change your WAP3205’s password (recommended) using the fields as shown. |
|
|
Old Password | Type the default password or the existing password you use to access the |
| system in this field. |
|
|
New Password | Type your new system password (up to 30 characters). Note that as you type |
| a password, the screen displays an asterisk (*) for each character you type. |
|
|
Retype to Confirm | Type the new password again in this field. |
|
|
Apply | Click Apply to save your changes back to the WAP3205. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
106 |
|
WAP3205 User’s Guide | |
|
|