Chapter 10 Wireless LAN

10.9 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab.

Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the WAP3205.

Figure 67 Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Table 37 Network > Wireless LAN > WPS

LABEL

DESCRIPTION

WPS Setup

 

 

 

Enable WPS

Select this to enable the WPS feature.

 

 

PIN Number

This displays a PIN number last time system generated. Click Generate to

 

generate a new PIN number.

 

 

Status

 

 

 

Status

This displays Configured when the WAP3205 has connected to a wireless

 

network using WPS or when Enable WPS is selected and wireless or wireless

 

security settings have been changed. The current wireless and wireless security

 

settings also appear in the screen.

 

This displays Unconfigured if WPS is disabled and there are no wireless or

 

wireless security changes on the WAP3205 or you click Release_Configuration

 

to remove the configured wireless and wireless security settings.

 

 

Release

This button is only available when the WPS status displays Configured.

Configuration

Click this button to remove all configured wireless and wireless security settings

 

 

for WPS connections on the WAP3205.

 

 

802.11 Mode

This is the 802.11 mode used. Only compliant WLAN devices can associate with

 

the WAP3205.

 

 

SSID

This is the name of the wireless network (the WAP3205’s first SSID).

 

 

Security

This is the type of wireless security employed by the network.

 

 

Apply

Click Apply to save your changes back to the WAP3205.

 

 

Cancel

Click Cancel to reload the previous configuration for this screen.

 

 

96

 

WAP3205 User’s Guide