Chapter 13 Troubleshooting
13.2 WAP3205 Access and Login
I don’t know the IP address of my WAP3205.
1The default IP address is 192.168.1.2.
2If you changed the IP address and have forgotten it,
•and your WAP3205 is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information.
•reset your WAP3205 to change all settings back to their default. This means your current settings are lost. See Section 13.4 on page 118 in the Troubleshooting for information on resetting your WAP3205.
I forgot the password.
1The default password is 1234.
2If this does not work, you have to reset the device to its factory defaults. See Section 13.4 on page 118.
I cannot see or access the Login screen in the Web Configurator.
1Make sure you are using the correct IP address.
•The default IP address is 192.168.1.2.
•If you changed the IP address (Section 11.4 on page 102), use the new IP address.
•If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I don’t know the IP address of my WAP3205.
2Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide.
3Make sure your Internet browser does not block
4Make sure your computer is in the same subnet as the WAP3205. (If you know that there are routers between your computer and the WAP3205, skip this step.)
•If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. See Section 11.4 on page 102.
•If there is no DHCP server on your network, make sure your computer’s IP address is in the same subnet as the WAP3205. See Appendix B on page 131.
116 |
|
WAP3205 User’s Guide | |
|
|