ZyXEL Communications WAP3205 Wireless Security: WPA-PSK/WPA2-PSK

Chapter 7 Connection Wizard

The following table describes the labels in this screen.

Table 23 Wireless Security: No Security

LABEL	DESCRIPTION
Wireless	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
Network	LAN.
Name (SSID)	If you change this field on the WAP3205, make sure all wireless clients use the same
	SSID in order to access the network.
Security mode	Select a security level from the drop-down list box.
	Choose None to have no wireless LAN security configured. If you do not enable any
	wireless security on your WAP3205, your network is accessible to any wireless
	networking device that is within range.
Exit	Click this to close the wizard screen without saving.
Back	Click this to return to the previous screen.
Next	Click this to continue.

Wireless Security: WPA-PSK/WPA2-PSK

Choose WPA-PSKor WPA2-PSKsecurity in the Security mode field to set up a password for your wireless network.

Figure 38 Wireless Security: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

Table 24 Wireless Security: WPA-PSK/WPA2-PSK

LABEL	DESCRIPTION
Wireless	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless
Network	LAN.
Name (SSID)	If you change this field on the WAP3205, make sure all wireless stations use the
	same SSID in order to access the network.
Security mode	Choose WPA-PSKor WPA2-PSKsecurity to configure a Pre-Shared Key. Choose
	this option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.
Wireless	Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
password	wireless connection by configuring WPA in the wireless LAN screens.

54
	WAP3205 User’s Guide