ZyXEL Communications WAP3205 5.6.3 WPA(2)-PSK

	Chapter 5 Universal Repeater Mode
Table 16 Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP
LABEL	DESCRIPTION
WEP Key 1 ~	The WEP keys are used to encrypt data. Both the WAP3205 and the access point
WEP Key 4	must use the same WEP key for data transmission.
	If you chose HEX, enter 10 or 26 hexadecimal characters in the range of "A-F",
	"a-f" and "0-9" (for example, 11AA22BB33) for a 64-bit or 128-bit WEP key
	respectively.
	If you chose ASCII, enter any 5 or 13 ASCII characters (case sensitive) ranging
	from "a-z", "A-Z" and "0-9" (for example, MyKey) for a 64-bit or 128-bit WEP key
	respectively.
	You must configure at least one key, only one key can be activated at any one
	time.
Apply	Click Apply to save your changes back to the WAP3205.
Reset	Click Reset to reload the previous configuration for this screen.

5.6.3 WPA(2)-PSK

Figure 24 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK

The following table describes the labels in this screen.

Table 17 Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-PSK

LABEL	DESCRIPTION
Universal Repeater Parameters
Enable	Select this option to have the WAP3205 connect to the specified access point.
SSID	Enter the name of the access point to which you are connecting.
MAC Address	Enter the MAC address of the access point to which you are connecting.
(Optional)
Security Mode	Select WPA-PSKor WPA2-PSKif the access point to which you want to connect
	uses WPA-PSK or WPA2-PSK.
Encryption Type	Select the type of wireless encryption employed by the access point to which you
	want to connect.
Pre-Shared Key	WPA-PSKor WPA2-PSKuses a simple common password for authentication.
	Type the password employed by the access point to which you want to connect.
Apply	Click Apply to save your changes back to the WAP3205.
Reset	Click Reset to reload the previous configuration for this screen.

	41
WAP3205 User’s Guide