Chapter 13 Troubleshooting

1Make sure the power LED is on.

2Press the RESET button for longer than 1 second to restart/reboot the WAP3205.

3Press the RESET button for longer than five seconds to set the WAP3205 back to its factory-default configurations.

If the WAP3205 restarts automatically, wait for the WAP3205 to finish restarting, and log in to the Web Configurator. The password is “1234”.

If the WAP3205 does not restart automatically, disconnect and reconnect the WAP3205’s power. Then, follow the directions above again.

13.5Wireless Router/AP Troubleshooting

I cannot access the WAP3205 or ping any computer from the WLAN (wireless AP or router).

1Make sure the wireless adapter on the wireless station is working properly.

2Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the WAP3205.

3Make sure your computer (with a wireless adapter installed) is within the transmission range of the WAP3205.

4Check that both the WAP3205 and your wireless station are using the same wireless and wireless security settings.

 

119

WAP3205 User’s Guide