Chapter 9 Routing Protocol

9.2.3 OSPF Area Commands

This table lists the commands for OSPF areas.

Table 51 router Commands: OSPF Areas

COMMAND

DESCRIPTION

router ospf

Enters sub-command mode.

[no] network interface area IP

Adds the specified interface to the specified area. The no

 

command removes the specified interface from the

 

specified area.

 

 

[no] area IP [{stub nssa}]

Creates the specified area and sets it to the indicated type.

 

The no command removes the area.

[no] area IP authentication

Enables text authentication in the specified area. The no

 

command disables authentication in the specified area.

[no] area IP authentication message-

Enables MD5 authentication in the specified area. The no

digest

command disables authentication in the specified area.

[no] area IP authentication

Sets the password for text authentication in the specified

authentication-key authkey

area. The no command clears the password.

[no] area IP authentication message-

Sets the MD5 ID and password for MD5 authentication in

digest-key <1..255> md5 authkey

the specified area. The no command clears the MD5 ID and

 

password.

9.2.4 Virtual Link Commands

This table lists the commands for virtual links in OSPF areas.

Table 52 router Commands: Virtual Links in OSPF Areas

COMMAND

DESCRIPTION

show ospf area IP virtual-link

Displays information about virtual links for the specified area.

router ospf

 

[no] area IP virtual-link IP

Creates the specified virtual link in the specified area. The no

 

command removes the specified virtual link.

[no] area IP virtual-link IP authentication

Enables text authentication in the specified virtual link. The no

 

command disables authentication in the specified virtual link.

[no] area IP virtual-link IP authentication

Enables MD5 authentication in the specified virtual link. The no

message-digest

command disables authentication in the specified virtual link.

[no] area IP virtual-link IP authentication

Sets the password for text authentication in the specified virtual

authentication-key authkey

link. The no command clears the password in the specified

 

virtual link.

[no] area IP virtual-link IP authentication

Sets the MD5 ID and password for MD5 authentication in the

message-digest-key <1..255> md5 authkey

specified virtual link. The no command clears the MD5 ID and

 

password in the specified virtual link.

[no] area IP virtual-link IP authentication

Sets the virtual link’s authentication method to the area’s default

same-as-area

authentication.

[no] area IP virtual-link IP

Sets the password for text authentication in the specified virtual

authentication-key authkey

link. The no command clears the password.

area IP virtual-link IP message-digest-key

Sets the MD5 ID and password for MD5 authentication in the

<1..255> md5 authkey

specified virtual link.

no area IP virtual-link IP message-digest-

Clears the MD5 ID in the specified virtual link.

key <1..255>

 

 

109

ZyWALL (ZLD) CLI Reference Guide