ZyXEL Communications ZLD 26.2 User/Group Commands Summary, 26.2.1 User Commands

Chapter 26 User/Group

26.2 User/Group Commands Summary

The following table identifies the values required for many username/groupname commands. Other input values are discussed with the corresponding commands.

Table 132 username/groupname Command Input Values

LABEL DESCRIPTION

username The name of the user (account). You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive.

groupname The name of the user group. You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number. This value is case-sensitive. It cannot be the same as the user name.

The following sections list the username/groupname commands.

26.2.1 User Commands

The first table lists the commands for users.

Table 133 username/groupname Commands Summary: Users

COMMAND	DESCRIPTION
show username [username]	Displays information about the specified user or about all users
	set up in the ZyWALL.
username username nopassword user-type {admin	Creates the specified user (if necessary), disables the password,
guest limited-admin user}	and sets the user type for the specified user.
username username password password user-type	Creates the specified user (if necessary); enables and sets the
{admin guest limited-admin user}	password; and sets the user type for the specified user.
	password: You can use 1-63 printable ASCII characters, except
	double quotation marks (“) and question marks (?).
username username user-type ext-user	Creates the specified user (if necessary) and sets the user type
	to Ext-User.
username username user-type ext-group-user	Specify the value of the AD or LDAP server’s Group Membership
associated-aaa-server server_profile group-id id	Attribute that identifies the group to which the specified ext-
	group-user type user account belongs.
no username username	Deletes the specified user.
username rename username username	Renames the specified user (first username) to the specified
	username (second username).
username username [no] description description	Sets the description for the specified user. The no command
	clears the description.
	description: You can use alphanumeric and ()+/
	:=?!*#@$_%- characters, and it can be up to 60 characters
	long.
username username [no] logon-time-setting	Sets the account to use the factory default lease and
<default manual>	reauthentication times or custom ones.

230
	ZyWALL (ZLD) CLI Reference Guide