Chapter 41 Reports and Reboot

 

 

Table 196 Packet Size Statistics Commands (continued)

COMMAND

DESCRIPTION

show report packet size statistics

Displays the specified interface’s packet size distribution statistics. You

{interface_name} [interval interval]

can also specify the packet size interval into which to group the

 

statistics.

 

interval: 128, 256, or 512 (bytes)

 

 

report packet size statistics clear

Clears the packet size statistics data for all interface.

41.2 Email Daily Report Commands

The following table identifies the values used in some of these commands. Other input values are discussed with the corresponding commands.

Table 197 Input Values for Email Daily Report Commands

LABEL

DESCRIPTION

e_mail

An e-mail address. You can use up to 80 alphanumeric characters, underscores (_),

 

periods (.), or dashes (-), and you must use the @ character.

 

 

Use these commands to have the ZyWALL e-mail you system statistics every day. You must use the configure terminal command to enter the configuration mode before you can use these commands.

Table 198 Email Daily Report Commands

COMMAND

DESCRIPTION

show daily-report status

Displays the e-mail daily report settings.

daily-report

Enters the sub-command mode for configuring daily e-mail

 

reports settings.

 

 

[no] activate

Turns daily e-mail reports on or off.

draw-usage-graphics

Has the report e-mail include usage graphs.

smtp-address {ip hostname}

Sets the SMTP mail server IP address or domain name.

[no] smtp-auth activate

Enables or disables SMTP authentication.

smtp-auth username username password password

Sets the username and password for SMTP authentication.

no smtp-address

Resets the SMTP mail server configuration.

no smtp-auth username

Resets the authentication configuration.

[no] smtp-port <1..65535>

Sets the SMTP authentication port. The no command deletes

 

the setting.

 

 

mail-subject set subject

Configures the subject of the report e-mails. Spaces are

 

allowed.

no mail-subject set

Clears the configured subject for the report e-mails.

[no] mail-subject append system-name

Determines whether the system name will be appended to the

 

subject of the report e-mails.

 

 

[no] mail-subject append date-time

Determines whether the sending date-time will be appended

 

at subject of the report e-mails.

 

 

[no] mail-from e_mail

Sets the sender e-mail address of the report e-mails.

[no] mail-to-1 e_mail

Sets to whom the ZyWALL sends the report e-mails (up to five

 

recipients).

[no] mail-to-2 e_mail

See above.

 

325

ZyWALL (ZLD) CLI Reference Guide