|
| Chapter 6 Interfaces |
|
|
|
| Table 28 Cellular Status | |
| STATUS | DESCRIPTION |
| Limited service | returned by the service provider in cases where the SIM card is expired, the user failed |
|
| to pay for the service and so on; you cannot connect to the Internet. |
|
|
|
| Device detected | displays when you connect a 3G device. |
|
|
|
| Device error | a 3G device is connected but there is an error. |
|
|
|
| Probe device fail | the ZyWALL’s test of the 3G device failed. |
|
|
|
| Probe device ok | the ZyWALL’s test of the 3G device failed. |
|
|
|
| Init device fail | the ZyWALL was not able to initialize the 3G device. |
|
|
|
| Init device ok | the ZyWALL initialized the 3G card. |
|
|
|
| Check lock fail | the ZyWALL’s check of whether or not the 3G device is locked failed. |
|
|
|
| Device locked | the 3G device is locked. |
|
|
|
| SIM error | there is a SIM card error on the 3G device. |
|
|
|
| SIM | the PUK is locked on the 3G device’s SIM card. |
|
|
|
| SIM | the PIN is locked on the 3G device’s SIM card. |
|
|
|
| Unlock PUK fail | Your attempt to unlock a WCDMA 3G device’s PUK failed because you entered an |
|
| incorrect PUK. |
|
|
|
| Unlock PIN fail | Your attempt to unlock a WCDMA 3G device’s PIN failed because you entered an |
|
| incorrect PIN. |
|
|
|
| Unlock device fail | Your attempt to unlock a CDMA2000 3G device failed because you entered an incorrect |
|
| device code. |
|
|
|
| Device unlocked | You entered the correct device code and unlocked a CDMA2000 3G device. |
|
|
|
| Get | The ZyWALL cannot get cellular device information. |
|
|
|
| Get | The ZyWALL succeeded in retrieving 3G device information. |
|
|
|
| Searching network | The 3G device is searching for a network. |
|
|
|
| Get signal fail | The 3G device cannot get a signal from a network. |
|
|
|
| Network found | The 3G device found a network. |
|
|
|
| Apply config | The ZyWALL is applying your configuration to the 3G device. |
|
|
|
| Device unready | The 3G interface is disabled. |
|
|
|
| Active | The 3G interface is enabled. |
|
|
|
| Incorrect device | The connected 3G device is not compatible with the ZyWALL. |
|
|
|
| Correct device | The ZyWALL detected a compatible 3G device. |
|
|
|
| Set band fail | Applying your band selection was not successful. |
|
|
|
| Set band ok | The ZyWALL successfully applied your band selection. |
|
|
|
| Set profile fail | Applying your ISP settings was not successful. |
|
|
|
| Set profile ok | The ZyWALL successfully applied your ISP settings. |
|
|
|
| PPP fail | The ZyWALL failed to create a PPP connection for the cellular interface. |
|
|
|
| Need | You need to enter the password for the 3G card in the cellular edit screen. |
|
|
|
| Device ready | The ZyWALL successfully applied all of your configuration and you can use the 3G |
|
| connection. |
|
|
|
| 79 |
ZyWALL (ZLD) CLI Reference Guide | |
|
|