Husqvarna CZE 4818 manual Transport, Important Information

Page 10

SAFETY INSTRUCTIONS

Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting.

Never make adjustments with the engine running.

The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer.

The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them.

Check the parking brake’s functionality regularly. Adjust and service as necessary.

The mulch deck shall only be used when higher quality mowing is desired in familiar areas.

Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the machine. Allow the machine to cool before putting it in storage.

Transport

The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer.

Use an approved trailer to transport the machine. Activate the parking brake, turn off the fuel supply, and fasten the machine with approved fastening devices, such as bands, chains, or ropes, when transporting.

Check and abide by local traffic regulations before transporting or driving the machine on any road.

8011-515

Never drive the machine in an enclosed space

8011-514

Clean the machine regularly

IMPORTANT INFORMATION

The parking brake is not sufficient to lock the machine in place during transport. Ensure that the machine is well fastened to the transport vehicle. Reverse the machine onto the transport vehicle to avoid tipping it over.

10

Image 10
Contents CZE Husqvarna. All Rights Reserved Beatrice, NE Contents Symbols and Decals Safety Instructions Safety InstructionsGeneral Use Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Important InformationSpecifications To Remove the Mower from Crate AssemblyTools Required for Assembly Before Removing the Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureOperation ControlsDeck Blades HOW to USE Your MowerOperation EngineTo Adjust the Deck Cutting Height See Fig ERS See Figure To Adjust ANTI-SCALP RollTo Operate on Hills To Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips General Recommendations Customer ResponsibilitiesBefore Each USE Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsMower Service and AdjustmentTo Level Deck FRONT-TO-BACK Adjustment See Fig To Replace Deck BeltTo Replace IZT Integraded Zeroturn Transaxle Belt See IZT Belt RemovalTo Start AN Engine with a Weak Battery To Adjust the Seat See FigTo Adjust Control Levers See Fig To Remove Wheels for RE- PairReplacing Battery See Fig To Adjust Park BrakeTracking Adjustment Fuel System BatteryStorage Engine OILCylinders OtherTroubleshooting Points Problem Cause CorrectionTo run when Wiring Schematic ´z+H56¶6M¨ Page 114 02 2003W33