Husqvarna CZE 4818 manual AIR Filter, Engine OIL Filter, Spark Plugs, IN-LINE Fuel Filter See Figs

Page 26

CUSTOMER RESPONSIBILITIES

Every 100 hours of operation (more often under extremely dusty, dirty conditions), remove the blower housing and other cooling shrouds. Clean the cooling fins and external surfaces as necessary. Make sure the cooling shrouds are reinstalled.

NOTE: Operating the engine with a blocked grass screen, dirty or plugged cooling fins, and/ or cooling shrouds removed will cause engine damage due to overheating.

AIR FILTER

Your engine will not run properly using a dirty air filter. Service air cleaner more often under dusty conditions. See Engine Manual.

KAWASAKI ENGINE

FUEL FILTER

CZ-14

FIGURE 11

ENGINE OIL FILTER

Replace the engine oil filter every season or every other oil change if the mower is used more than 100 hours in one year.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. For spark plug type and gap setting refer to your ENGINE OWNER’S MANUAL.

FUEL SHUT OFF VALVE

IN-LINE FUEL FILTER (See Figs. 11 and 12)

The fuel filter should be replaced once each season. If the fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•First turn off the fuel valve that is located under the fuel tank of you mower.

•With the engine cool, remove the filter and plug fuel line sections.

•Place new filter in position in fuel line with arrow pointing toward the carburetor.

•Be sure there are no fuel leaks and clamps are secure and properly posi- tioned.

•Immediately wipe up any spilled gasoline.

CZ-15

FIGURE 12

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive

type wax.

We do not recommend using a garden hose to clean your mower unless the electrical system, muffler, air filter and carburetor are covered to keep water out. Water in the engine can shorten the engine life.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents CZE Husqvarna. All Rights Reserved Beatrice, NE Contents Symbols and Decals General Use Safety InstructionsSafety Instructions Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Important InformationSpecifications To Remove the Mower from Crate AssemblyTools Required for Assembly Before Removing the Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureOperation ControlsDeck Blades HOW to USE Your MowerOperation EngineTo Adjust the Deck Cutting Height See Fig To Operate on Hills To Adjust ANTI-SCALP RollERS See Figure To Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips Before Each USE Customer ResponsibilitiesGeneral Recommendations Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsTo Level Deck Service and AdjustmentMower FRONT-TO-BACK Adjustment See Fig To Replace Deck BeltTo Replace IZT Integraded Zeroturn Transaxle Belt See IZT Belt RemovalTo Start AN Engine with a Weak Battery To Adjust the Seat See FigTo Adjust Control Levers See Fig To Remove Wheels for RE- PairReplacing Battery See Fig To Adjust Park BrakeTracking Adjustment Fuel System BatteryStorage Engine OILCylinders OtherTroubleshooting Points Problem Cause CorrectionTo run when Wiring Schematic ´z+H56¶6M¨ Page 114 02 2003W33
Top Page Image Contents