Husqvarna CZE 4818 manual Check the Tire Pressure, Checklist

Page 14

ASSEMBLY

CHECK THE TIRE PRESSURE

Correct tire pressure is important for best cutting performance.

•Check the tire pressure and adjust accordingly. Refer to the “SPECIFICA- TIONS” section in this manual.

CHECKLIST

PLEASE REVIEW THE FOLLOWING

CHECKLIST

•All assembly instructions have been completed

•No remaining loose parts in crate

•Seat is adjusted properly and securely fastened

•All tires are properly inflated

•Check wiring. See that all connections are still secure, and wires are properly clamped.

•Before driving the mower, be sure the IZT(Integraded Zeroturn Transaxle) bypass linkages are in the drive position.

WHILE LEARNING HOW TO USE YOUR MOWER, PAY EXTRA ATTENTION TO THE FOLLOWING ITEMS:

•Engine oil is at proper level

•Fuel tank is filled with fresh, clean, regular unleaded gasoline. Check your engine manual for fuel requirements.

•Become familiar with all controls – their location and function. Operate them before you start the engine.

•Become familiar with unit operation on a flat and level area with the mower deck shut off.

•Be sure the brake system is in a safe operating condition. If adjustment is needed see Service and Adjustment section.

14

Image 14

Contents CZE Husqvarna. All Rights Reserved Beatrice, NE Contents Symbols and Decals General Use Safety InstructionsSafety Instructions Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Important InformationSpecifications To Remove the Mower from Crate AssemblyTools Required for Assembly Before Removing the Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureOperation ControlsDeck Blades HOW to USE Your MowerOperation EngineTo Adjust the Deck Cutting Height See Fig To Operate on Hills To Adjust ANTI-SCALP RollERS See Figure To Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips Before Each USE Customer ResponsibilitiesGeneral Recommendations Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsTo Level Deck Service and AdjustmentMower FRONT-TO-BACK Adjustment See Fig To Replace Deck BeltTo Replace IZT Integraded Zeroturn Transaxle Belt See IZT Belt RemovalTo Start AN Engine with a Weak Battery To Adjust the Seat See FigTo Adjust Control Levers See Fig To Remove Wheels for RE- PairReplacing Battery See Fig To Adjust Park BrakeTracking Adjustment Fuel System BatteryStorage Engine OILCylinders OtherTroubleshooting Points Problem Cause CorrectionTo run when Wiring Schematic ´z+H56¶6M¨ Page 114 02 2003W33