Husqvarna Auto Mower manual English-11

Page 10

PRESENTATION

The STOP button on the top of Auto Mower is mainly used to stop the mower when it’s running. When the STOP button is pressed a cover opens, behind which there is a control panel. The STOP button remains depressed until the cover is closed again. This acts as start inhibitor.

The control panel on the top of the Auto Mower is where you manage all the mower settings. The main switch is also located on the control panel. Open the control panel cover by pressing down the STOP button.

When the main switch is turned ON for the first time, a start-up sequence begins which includes: selection of the language, time format, date format and the four digit PIN code as well as the setting of the time and date, see page 25.

The Auto Mower can enter a sleep mode to save power. The display on the control panel is then com- pletely dimmed.

The sleep mode is activated 25 minutes after the STOP button has been pressed and then not reset to the operating mode. Auto Mower is then activated by switching the main switch off and on.

The sleep mode can also be activated in the event of a fault occurring during mowing or charging and which is not rectified within 25 minutes. The Auto Mower is then activated by pressing the STOP button.

3012-247

3012-283

3012-297

English-11

Image 10
Contents Auto Mower Auto Mower Helpdesk Introduction IntroductionCongratulations Symbols SymbolsSymbols on the Auto Mower Symbols in the Operator’s Manual Xxxxxx xxx xxxx xxxxxxx xxx xxxx xxxx xxxxxSafety Instructions Safety InstructionsUse Maintenance TransportPresentation PresentationFunction Auto Mower Working methodEnglish-11 Capacity Movement patternInstallation InstallationPreparations Auto Mower, what is what? Numbers in the picture corresponds toCharging station Planning the installationLength of the low voltage cable must not be changed English-16 English-17 Boundary wire 10 cm Minimise Placing the charging station Charging the battery Laying out the boundary wireConnecting the boundary wire English-24 Checking the installation Linking the Auto Mower to the charging stationControl Panel Control panelShortcuts ProgramSelect Main switchNumbers Menu functions Menu FunctionsMain menu Commands TimerTimer override Drive past wire InstallationCharge exit settings Garden shapeDrive past wire Garden shape Check loop Charge exit settings Settings PIN code Sounds Significance Starting Charging Security Sounds User info level Use Charging a discharged batteryUSE Starting the Auto MowerRestart Using the timerStopping the Auto Mower Turn off Auto MowerAdjusting the cutting height Battery MaintenanceMaintenance Winter StorageUnderframe and blade disc CleaningBody Replacing the blade units Trouble shooting Trouble ShootingFault messages Empty battery Fault message Cause Action OutsideLow battery voltage Wrong PIN codeTrouble Shooting Guide Technical Data Technical DataEU declaration of conformity EU Declaration of ConformityEU Declaration of Conformity only applies to Europe 114 01 2003W23Also See