Husqvarna Auto Mower manual Drive past wire Garden shape Check loop

Page 32

MENU FUNCTIONS

Also use begin and end angle 2 in the menu ”Custom- ized” if you want to use two sectors.

Use the function ”Proportion first” as well to state a percentage to determine how often the Auto Mower should leave the charging station in sector 1. For example, the percentage 75% means the mower will leave the charging station in sector 1, 75% of the time and in sector 2, 25% of the time.

3012-246

Automatic (3-1-1)

In order for Auto Mower to follow the preselected exit settings: Move the cursor to ”Automatic” and press YES. Then press YES again to the question ”Reset to default?”.

Charge exit settings

Drive past wire

Garden shape

Check loop

3-1

Automatic

Customized

3-1-

Customized (3-1-2)

Reversing dist.

State the number of centimetres you want the Auto Mower to reverse before it turns to drive out of the charging station.

The default reversing distance is 60 cm.

Begin angle 1

State in degrees where you want the sector/sec- tor 1 to start.

End angle 1

State in degrees where you want the sector/sec- tor 1 to end.

Begin angle 2

State in degrees where you want the sector/sec- tor 2 to start.

End angle 2

State in degrees where you want the sector/sec- tor 2 to end.

Proportion first

When you use two exit sectors: State a percent- age to define on how many occasions the Auto Mower should leave the charging station in sec- tor 1.

Automatic

Customized

3-1-2

Reversing dist.

Begin angle 1

End angle 1

Begin angle 2

End angle 2

Proportion first

English-33

Image 32
Contents Auto Mower Auto Mower Helpdesk Congratulations IntroductionIntroduction Symbols on the Auto Mower SymbolsSymbols Symbols in the Operator’s Manual Xxxxxx xxx xxxx xxxxxxx xxx xxxx xxxx xxxxxUse Safety InstructionsSafety Instructions Maintenance TransportPresentation PresentationFunction Auto Mower Working methodEnglish-11 Capacity Movement patternPreparations InstallationInstallation Auto Mower, what is what? Numbers in the picture corresponds toLength of the low voltage cable must not be changed Planning the installationCharging station English-16 English-17 Boundary wire 10 cm Minimise Placing the charging station Charging the battery Laying out the boundary wireConnecting the boundary wire English-24 Checking the installation Linking the Auto Mower to the charging stationControl Panel Control panelShortcuts ProgramNumbers Main switchSelect Main menu Menu FunctionsMenu functions Commands TimerTimer override Installation Charge exit settingsDrive past wire Garden shapeDrive past wire Garden shape Check loop Charge exit settings Settings PIN code Sounds Significance Starting Charging Security Sounds User info level Charging a discharged battery USEUse Starting the Auto MowerUsing the timer Stopping the Auto MowerRestart Turn off Auto MowerAdjusting the cutting height Maintenance MaintenanceBattery Winter StorageBody CleaningUnderframe and blade disc Replacing the blade units Fault messages Trouble ShootingTrouble shooting Fault message Cause Action Outside Low battery voltageEmpty battery Wrong PIN codeTrouble Shooting Guide Technical Data Technical DataEU Declaration of Conformity only applies to Europe EU Declaration of ConformityEU declaration of conformity 114 01 2003W23Also See