Husqvarna Auto Mower manual Settings

Page 34

MENU FUNCTIONS

4. Settings

Via this option in the main menu you access the avail- able settings. Select among the submenus:

•Security (4-1)

to make settings concerning the PIN code, stop protection, settings lock and alarms. The PIN code must be stated for the ”Security” menu to be shown. All security and theft protection functions must be activated manually when Auto Mower is new.

•Sounds (4-2)

to adjust the sound level for the functions blade start-up, operation, charging, fault messages and keypad.

•User info level (4-3)

to determine the level of detailed for information shown on the display when Auto Mower is opera- tional.

•Language (4-4)

to select the menu language.

•Time and date (4-5)

to set the current time and day as well as the require time and date format.

Security (4-1)

•PIN code (4-1-1)

Via this function you can change your PIN code at any time.

•To change the PIN code: Move the cursor to ”PIN code” and press YES. Place the Auto Mower in the charging station. Enter the new PIN-code and press YES. Enter the same code again to confirm and press YES.

When the PIN-code has been changed, the message ”PIN-CODE CHANGED” is displayed for a few seconds. The ”Security” menu will then appear again.

Commands

Timer

Installation

Settings

Security

Sounds

User info level

Language

Time and date

4-1

Security

Sounds

User info level

Language

Time and date

4-

PIN code

Time lock

Stop protection

Settings lock

4-1-

English-35

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Auto Mower Auto Mower Helpdesk Introduction IntroductionCongratulations Symbols SymbolsSymbols on the Auto Mower Symbols in the Operator’s Manual Xxxxxx xxx xxxx xxxxxxx xxx xxxx xxxx xxxxxSafety Instructions Safety InstructionsUse Maintenance TransportPresentation PresentationFunction Auto Mower Working methodEnglish-11 Capacity Movement patternInstallation InstallationPreparations Auto Mower, what is what? Numbers in the picture corresponds toCharging station Planning the installationLength of the low voltage cable must not be changed English-16 English-17 Boundary wire 10 cm Minimise Placing the charging station Charging the battery Laying out the boundary wireConnecting the boundary wire English-24 Checking the installation Linking the Auto Mower to the charging stationControl Panel Control panelShortcuts ProgramSelect Main switchNumbers Menu functions Menu FunctionsMain menu Commands TimerTimer override Drive past wire InstallationCharge exit settings Garden shapeDrive past wire Garden shape Check loop Charge exit settings Settings PIN code Sounds Significance Starting Charging Security Sounds User info level Use Charging a discharged batteryUSE Starting the Auto MowerRestart Using the timerStopping the Auto Mower Turn off Auto MowerAdjusting the cutting height Battery MaintenanceMaintenance Winter StorageUnderframe and blade disc CleaningBody Replacing the blade units Trouble shooting Trouble ShootingFault messages Empty battery Fault message Cause Action OutsideLow battery voltage Wrong PIN codeTrouble Shooting Guide Technical Data Technical DataEU declaration of conformity EU Declaration of ConformityEU Declaration of Conformity only applies to Europe 114 01 2003W23Also See
Top Page Image Contents