Husqvarna Auto Mower manual Select, Numbers, Main switch

CONTROL PANEL

Select

6.Clr:

•Press to go back one step in the menu structure.

7.YES

•Press to confirm an entry or selection.

•Press to start the mower if more than 10 sec- onds has elapsed since you last pressed a but- ton and you want to close the control panel cover.

8.Arrows

•Press any of the arrow buttons to browse between menus or different selections.

Numbers

9.Used in the menu structure to enter settings, for example, PIN code, time or exit direction.

Also used to state a number series as a shortcut to the different menus. See more about number series in ”Number series” on page 29.

Main switch

10.Set the main switch in the ”ON” position to start the Auto Mower.

Set the main switch in the ”OFF” position when you are not using the mower or if you want to work on the blade disc.

When the main switch is set in the ”OFF” position the motors on the mower cannot start.

When the main switch is turned ON for the first time, a start-up sequence begins which includes: selection of the language, time format, date format and four digit PIN code as well as setting of the time and date, see page 25.

6 8

7

3012-242

3012-243

ON

OFF

10

3012-244

English-28