USE
Use
Charging a discharged battery
When the Auto Mower is new or has been stored for a long period the battery will not be charged and needs to be charged before starting. Charging takes between 1 1/2 and 2 1/2 hours.
1.Place the Auto Mower in the charging station. Make sure the charging strips on the mower makes good contact with the contact strips on the charging station.
Good contact is made when both charging strips lie against the centre of the contact strips.
2.Open the control panel cover.
3.Set the main switch to the ON position.
Information about the charging process is shown on the display during the entire charging process.
WARNING
Read the safety instructions before you start your Auto Mower.
WARNING
Keep your hands and feet away from the rotating blades.
Never put your hands or feet close to or under the body when the motor is run- ning.
Starting the Auto Mower
1.Press the STOP button to open the control panel cover.
2.Set the main switch to the ON position.
If the time lock is activated: Enter the
3.Close the cover.
The message ”STARTING” is shown on the display. If the Auto Mower is set with the sound on you will also hear 1 beep/second for 5 seconds when blade disc starts.
ON
OFF