Husqvarna Auto Mower manual Introduction, Congratulations

Page 3

INTRODUCTION

Introduction

Congratulations

Thank you for purchasing a Husqvarna Auto Mower. The Husqvarna Auto Mower is designed to offer user friendliness, high operating safety and a long service life. Auto Mower has been built to mow areas that contain slopes and conﬁned passages as well as many trees and bushes. Using only a minimum of supervision and maintenance you can have a well-kept lawn throughout the season.

This Operator’s Manual is a valuable document. By following its contents (use, maintenance, etc) you can contribute towards a long life for the mower and enhance its trade-in value. Read through the Operator's Manual carefully before you start to install and use your Auto Mower.

Save the Operator’s Manual and, if you sell your Auto Mower, make sure you hand it over to the new owner.

Husqvarna Auto Mower is designed to mow the grass on ordinary lawns free from stones, large branches and the like. All other types of use are incorrect. The manufacturer’s instructions with regard to driving, maintenance, and repair must be followed precisely.

WARNING!

Under no circumstances may the original design of the Auto Mower be modiﬁed without the expressed permission of the manufacturer.

Unauthorized modiﬁcations and/or components can result in serious disruptions and the risk of personal injuries.

Always use original spare parts.

English-4

Image 3

Contents Auto Mower Auto Mower Helpdesk Introduction IntroductionCongratulations Symbols SymbolsSymbols on the Auto Mower Xxxxxx xxx xxxx xxxxxxx xxx xxxx xxxx xxxxx Symbols in the Operator’s ManualSafety Instructions Safety InstructionsUse Transport MaintenancePresentation PresentationWorking method Function Auto MowerEnglish-11 Movement pattern CapacityInstallation InstallationPreparations Numbers in the picture corresponds to Auto Mower, what is what?Planning the installation Charging stationLength of the low voltage cable must not be changed English-16 English-17 Boundary wire 10 cm Minimise Placing the charging station Laying out the boundary wire Charging the batteryConnecting the boundary wire English-24 Linking the Auto Mower to the charging station Checking the installationControl panel Control PanelProgram ShortcutsMain switch SelectNumbers Menu Functions Menu functionsMain menu Timer CommandsTimer override Garden shape InstallationCharge exit settings Drive past wireDrive past wire Garden shape Check loop Charge exit settings Settings PIN code Sounds Signiﬁcance Starting Charging Security Sounds User info level Starting the Auto Mower Charging a discharged batteryUSE UseTurn off Auto Mower Using the timerStopping the Auto Mower RestartAdjusting the cutting height Winter Storage MaintenanceMaintenance BatteryCleaning Underframe and blade discBody Replacing the blade units Trouble Shooting Trouble shootingFault messages Wrong PIN code Fault message Cause Action OutsideLow battery voltage Empty batteryTrouble Shooting Guide Technical Data Technical DataEU Declaration of Conformity EU declaration of conformityEU Declaration of Conformity only applies to Europe 2003W23 114 01Also See