Husqvarna SMB 70, SMB 70 E manual Rails, Log Bolsters a, Folding Stops C, Height Adjustment B

Page 13

DESCRIPTION

Rails

The rails consist of two sections (standard delivery). Each section is 3 m. The sections are aligned and bolted together into a track for the carriage. The rail sections are bolted together and fastened using M12 bolts with nuts, which assures stability and ensures that the carriage runs straight.

The rails also have a number of transverse log bolsters, designed to provide a stable support for the log to be cut or the planks to be trimmed.

The rails’ transverse log bolsters are equipped with:

•Folding stop for the log

•Log lock

•Height adjustment of one end of the log

The rails are also fitted with stops at both ends for the saw carriage, as well as adjustable jointing plates on the section joints.

FIG. 9

FIG. 10

Log Bolsters (A)

The rails have a number of transverse log bol- sters that provide a stable support for the log to be cut or the planks to be trimmed.

Folding Stops (C)

There are a number of folding stops for the log on the left-hand side of the rails. To increase usabil- ity, the stops come in two different lengths.

Height Adjustment (B)

The height adjustment is designed to raise the small end of the log, so that the core becomes horizontal.

Log Locks (D)

The log locks consist of a cam with handle, housed in a moveable unit. The locks are used to secure the log against the folding stops.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SMB SMB 70 E Table of Contents Introduction IntroductionSymbols KEY to SymbolsSafety Regulations Safety RegulationsPersonal Protective Equipment Fuel Safety One-man Sawmill Safety EquipmentSafety During Use PersonnelOne-man Sawmill Petrol Engine DescriptionTools and operator’s manual One-man Sawmill Electric Motor Description Carriage FIG Height Setting FIGFrame and FIG Handlebars FIG Cleaning Tank FIGBand Wheels FIG Bandsaw and Band Guide FIGRails Height Adjustment BLog Bolsters a Folding Stops CRail Stop Adjustable Support FeetRail Guard Safety Devices Installation InstallationInstallation Site UnpackingSaw Carriage Setting up the Saw CarriageAssembling the Saw Carriage Saw Carriage Adjustment Band Cleaning Tank FIG Propulsion Wire adjustmentPetrol Engine Electric MotorBandsaw Blade Scale FIG Fuel Fuel HandlingPetrol FuellingStarting a Cold Petrol Engine Starting and StoppingStopping a Petrol Engine Starting a Warm Petrol EngineStarting the Electric Motor Starting the Electric SawmillStopping the Electric Motor Securing the Log USESawing Calculating the YieldStarting the Petrol Engine Edging Dismantling MaintenanceMaintenance Maintenance Drive Belt FIG Band Wheel AdjustmentChecking the Braking Function Saw Unit’s Height AdjustmentDaily Maintenance MaintenancePetrol Engine Technical DataNoise Levels EC Declaration of Conformity Only applies to Europe38 ´z+H66¶6R¨ English ´z+H66¶6R¨
Top Page Image Contents