Husqvarna SMB 70, SMB 70 E manual Handlebars FIG, Band Cleaning Tank FIG

Page 19

INSTALLATION

Handlebars (FIG. 27)

Attach the handlebars with the start lever (5) at a suitable height on the right-hand frame (25) and tighten the screws to 10 Nm. Attach the weight

(A) to the rear end of the handlebars.

Band Cleaning Tank (FIG. 28)

The tank (3) is placed on the mounting located on the right-hand side of the sawmill. The band cleaning fluid flow is regulated with a continu- ously variable manual valve on the tank (FIG. 28A).

The tank (3) can be easily removed from the sawmill. The spiral hose is inserted through the hole in the band guide (8) and is connected in the hole on the plate mounted on the adjustable band guide. The fluid can then run down and clean the bandsaw blade.

FIG. 27

FIG. 28

English – 19

Image 19

Contents SMB SMB 70 E Table of Contents Introduction IntroductionSymbols KEY to SymbolsSafety Regulations Safety RegulationsPersonal Protective Equipment Personnel One-man Sawmill Safety EquipmentFuel Safety Safety During UseOne-man Sawmill Petrol Engine DescriptionTools and operator’s manual One-man Sawmill Electric Motor Description Carriage FIG Height Setting FIGFrame and FIG Bandsaw and Band Guide FIG Cleaning Tank FIGHandlebars FIG Band Wheels FIGFolding Stops C Height Adjustment BRails Log Bolsters aRail Stop Adjustable Support FeetRail Guard Safety Devices Unpacking InstallationInstallation Installation SiteSaw Carriage Setting up the Saw CarriageAssembling the Saw Carriage Saw Carriage Adjustment Band Cleaning Tank FIG Electric Motor Wire adjustmentPropulsion Petrol EngineBandsaw Blade Scale FIG Fuelling Fuel HandlingFuel PetrolStarting a Warm Petrol Engine Starting and StoppingStarting a Cold Petrol Engine Stopping a Petrol EngineStarting the Electric Motor Starting the Electric SawmillStopping the Electric Motor Securing the Log USESawing Calculating the YieldStarting the Petrol Engine Edging Dismantling MaintenanceMaintenance Maintenance Drive Belt FIG Band Wheel AdjustmentChecking the Braking Function Saw Unit’s Height AdjustmentDaily Maintenance MaintenancePetrol Engine Technical DataNoise Levels EC Declaration of Conformity Only applies to Europe38 ´z+H66¶6R¨ English ´z+H66¶6R¨