Husqvarna SMB 70, SMB 70 E manual Edging

Page 29

			USE
	8.	Loosen the log and turn it 90°.	FIG. 51
	9.	Adjust the top end of the log using the height	FIG. 51
	9.	Adjust the top end of the log using the height
		adjuster and secure the log with the flat
		surface tightened against the stop.

10. Cut off the upper sapwood.

FIG. 52

11. Loosen the log, turn it 180°, lower the height adjuster, and secure the log.

12. Cut the block according to the previous instructions. Remember to compensate for the thickness of the bandsaw blade for each adjustment of the bandsaw blade’s height.

Data for the height adjustment crank:

• 1 turn = 5 mm.

The scale can also be used for varying standard dimensions.

Edging

Several boards can be edged simultaneously by clamping them against the stop.

Place a batten between the boards and the stop in order to keep the boards still during cutting. The batten should be at least 50 x 100 mm.

FIG. 53

English – 29

Image 29

Contents SMB SMB 70 E Table of Contents Introduction IntroductionSymbols KEY to SymbolsPersonal Protective Equipment Safety RegulationsSafety Regulations Fuel Safety One-man Sawmill Safety EquipmentSafety During Use PersonnelOne-man Sawmill Petrol Engine DescriptionTools and operator’s manual One-man Sawmill Electric Motor Description Frame and FIG Height Setting FIGCarriage FIG Handlebars FIG Cleaning Tank FIGBand Wheels FIG Bandsaw and Band Guide FIGRails Height Adjustment BLog Bolsters a Folding Stops CRail Guard Adjustable Support FeetRail Stop Safety Devices Installation InstallationInstallation Site UnpackingAssembling the Saw Carriage Setting up the Saw CarriageSaw Carriage Saw Carriage Adjustment Band Cleaning Tank FIG Propulsion Wire adjustmentPetrol Engine Electric MotorBandsaw Blade Scale FIG Fuel Fuel HandlingPetrol FuellingStarting a Cold Petrol Engine Starting and StoppingStopping a Petrol Engine Starting a Warm Petrol EngineStopping the Electric Motor Starting the Electric SawmillStarting the Electric Motor Securing the Log USESawing Calculating the YieldStarting the Petrol Engine Edging Dismantling MaintenanceMaintenance Maintenance Drive Belt FIG Band Wheel AdjustmentChecking the Braking Function Saw Unit’s Height AdjustmentDaily Maintenance MaintenancePetrol Engine Technical DataNoise Levels EC Declaration of Conformity Only applies to Europe38 ´z+H66¶6R¨ English ´z+H66¶6R¨