Husqvarna SMB 70, SMB 70 E manual Maintenance

Page 31

MAINTENANCE

Saw Setting Pliers

For optimal results the bandsaw blade should be set using the saw setting pliers as described on page 30.

The saw setting pliers are adjusted to the correct setting size.

Place the saw setting pliers over the saw tooth so that the pliers’ fixing angles rest on the two closest teeth.

Activate the pliers and the saw tooth will be set away from the operator.

FIG. 56

English – 31

Image 31

Contents SMB SMB 70 E Table of Contents Introduction IntroductionSymbols KEY to SymbolsSafety Regulations Safety RegulationsPersonal Protective Equipment Personnel One-man Sawmill Safety EquipmentFuel Safety Safety During UseOne-man Sawmill Petrol Engine DescriptionTools and operator’s manual One-man Sawmill Electric Motor Description Carriage FIG Height Setting FIGFrame and FIG Bandsaw and Band Guide FIG Cleaning Tank FIGHandlebars FIG Band Wheels FIGFolding Stops C Height Adjustment BRails Log Bolsters aRail Stop Adjustable Support FeetRail Guard Safety Devices Unpacking InstallationInstallation Installation SiteSaw Carriage Setting up the Saw CarriageAssembling the Saw Carriage Saw Carriage Adjustment Band Cleaning Tank FIG Electric Motor Wire adjustmentPropulsion Petrol EngineBandsaw Blade Scale FIG Fuelling Fuel HandlingFuel PetrolStarting a Warm Petrol Engine Starting and StoppingStarting a Cold Petrol Engine Stopping a Petrol EngineStarting the Electric Motor Starting the Electric SawmillStopping the Electric Motor Securing the Log USESawing Calculating the YieldStarting the Petrol Engine Edging Dismantling MaintenanceMaintenance Maintenance Drive Belt FIG Band Wheel AdjustmentChecking the Braking Function Saw Unit’s Height AdjustmentDaily Maintenance MaintenancePetrol Engine Technical DataNoise Levels EC Declaration of Conformity Only applies to Europe38 ´z+H66¶6R¨ English ´z+H66¶6R¨