Ryobi RY26901, CS26, RY26500 Removing the Tri-Arcblade and brushcutter guard, See Figures 10

Page 15

ASSEMBLY

REMOVING THE Tri-Arc®blade and brushcutter guard

See Figures 10 - 11.

Align the slot in the flanged washer with the slot in the gear head.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Remove the blade nut by turning it clockwise.

Remove the cupped washer and the blade.

Remove the flanged washer from the gear head shaft and retain it for the string head installation.

Remove the three screws securing the brushcutter guard to gear head.

Remove the brushcutter guard.

NOTE: Store the brushcutter parts together for later use.

INSTALLING THE straight shaft GRASS DEFLECTOR AND STRING HEAD

See Figures 10 - 12.

Install the grass deflector. Refer to To Attach the Straight Shaft Grass Deflector - SS26 earlier in this manual.

Place the flanged washer on the gear head shaft.

NOTE: The hollow side of the flanged washer should face the gear head.

Install the arbor.

Install the string head assembly onto the gear head shaft. Refer to Installing Bump Feed String Head or Installing Dual Spool™ Fixed Line String Head Insert later in this manual.

Converting from String Trimmer to Brushcutter - BC26

To convert from the string trimmer to the brushcutter, remove the string head assembly and straight shaft grass deflector, attach the brushcutter guard and install the blade.

Removing the straight shaft grass deflector and String head

See Figures 10 - 13.

Align the slot in the flanged washer with the slot in the gear head.

Remove the hex head bolt and string head assembly.

Remove the arbor.

Remove the flanged washer and retain it for the blade installation.

Remove the wing screw securing the grass deflector.

Remove the grass deflector.

NOTE: Store the string head parts together for later use.

installing the Tri-Arc®Blade and brushcutter guard

See Figures 10 - 14.

Install the brushcutter guard. Refer to Attaching the Brushcutter Guard - BC26 earlier in this manual.

Place the flanged washer over the gear head shaft with the hollow side toward the brushcutter guard.

Center the blade on the flanged washer, making sure the blade fits flat and the raised hub of the flanged washer goes through the hole in the blade.

Install the cupped washer with the raised center away from the blade.

Place the blade nut onto the gear head shaft.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Install the blade nut by turning it counterclockwise (left handed threads).

Tighten the blade nut securely and torque to 120 in.lb. minimum.

9 — English

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Todas LAS Versiones Save this Manual for Future ReferenceCS26 RY26500 RY26901 Toutes LES VersionsPage Bobine À FIL Fixe Dual Spooltm CS26SS26 BC26Bolt boulon, perno Proper Operating Position Bonne Position DE TravailDE LA Herramienta Carrete Insert Line through slots until approx Vii Table of Contents Read all instructions General Safety RulesSpecific Safety Rules Specific safety rules for trimmer useSpecific safety rules for ­ brushcutter and blade use Explanation SymbolsSymbol Name Symbol Signal MeaningTOP-MOUNTED Motor FeaturesService Grass DeflectorUnpacking AssemblyInstallING the Power Head to the Attachment Removing the attachment from the power headAttaching the J Handle BC26 Attaching the Storage HangerRemoving the straight shaft grass deflector and String head Installing the Tri-ArcBlade and brushcutter guardRemoving the Tri-Arcblade and brushcutter guard Converting from String Trimmer to Brushcutter BC26Operating the Trimmer OperationFueling and Refueling the trimmer Oxygenated FuelsOperating the Brushcutter To Advance the Cutting line bump feed string headCutting Tips Grass Deflector line Trimming CUT-OFF BladeSee Figures 21 Tri-ArcBLADECutting Technique Blade Starting and StoppingGeneral Maintenance MaintenanceCleaning the Exhaust Port and Muffler Spark Arrestor Fuel CAPStoring the Product Troubleshooting Gap. Refer to Spark Plug Replacement earlierSpeed. See Figure This product was manufactured with a catalyst muffler WarrantyLimited Warranty Statement MANUFACTURER’S Warranty Coverage Lire Toutes LES Instructions Règles DE Sécurité GénéralesRègles DE Sécurité Particulières Symboles Symbole NomExplication Caractéristiques Avertissement Installation DU BLOC-MOTEUR SUR L’ACCESSOIREDéballage Liste des piècesAssemblage Retrait DE LA Lame TRI-ARCET DU PARE- Débris Installation DE LA Bandoulière BC26Installation DE LA Lame TRI-ARCET DU PARE-DÉBRIS Conversion DE Débroussailleuse EN TAILLE-BORDURES BC26Utilisation Approvisionnement EN CarburantCarburants Oxygénés Avertissement Coups DU Déflecteur D’HERBE Utilisation DU TAILLE-BORDURESConseils DE Coupe Lame DE Sectionnement DE Ligne DEDémarrage ET Arrêt Ricochet DE LameLame TRI-ARC Techniques DE Coupe Lame AvertissementEntretien Général Remplacement DE LA BobineInstallation de la bobine à fil fixe Dual Spool EntretienRemisage le produit REMPLACement de la BougieNettoyage DU Filtre À AIR Écran Réglage du ralentiDépannage ’AIDE GarantieÉnoncé DE LA Garantie Limitée Responsabilités DU Propriétaire Dans LE Cadre DE LA Garantie Reglas DE Seguridad Generales AdvertenciaLea todas las instrucciones Reglas DE Seguridad Específicas Explicatión SímbolosPeligro PrecauciónCaracterísticas Instalación DEL Cabezal Motor EN EL Aditamento ArmadoDesempaquetado Lista de empaquetadoMontaje DEL Deflector DE Pasto Advertencia Montaje DE LA ASA DE ALMACENAMIENTOVea las figuras 10 y Montaje de la correa para el hombro BC26Conversión de desbrozadora a recortadora de hilo BC26 Conversión de recortadora de hilo a desbrozadora BC26Funcionamiento Llenado DEL TanqueCombustibles Oxigenados Utilización DE LA Desbrozadora Manejo DE LA RecortadoraSugerencias Para Cortar Cuchilla DE Corte DEL Hilo EN EL Deflector DE HierbaArranque Y Apagado Contragolpe DE LA CuchillaCuchilla Tri-Arc Técnica DE Corte CON Cuchilla AdvertenciaVea las figuras 24 MantenimientoMantenimiento General Reemplazo DEL CarreteLimpieza DEL Orificio DE Escape Y DEL Silenciador ParachispasTapa DEL Tanque DE Combustible Advertencia El motor no arranca No hay chispa Solución DE Problemas4050 GarantíaDeclaración DE LA Garantía Limitada Cobertura DE LA Garantía DEL Fabricante Page California Propuesta DE LEY NÚM Manuel D’UTILISATION / Manual DEL OperadorCalifornia Proposition Proposition 65 DE L’ÉTAT DE Californie
Related manuals
Manual 48 pages 50.23 Kb

RY26500, CS26, RY26901 specifications

The Ryobi CS26 is a versatile and powerful gas string trimmer designed for homeowners and landscape professionals alike. Featuring a 26cc, 2-cycle engine, the CS26 provides ample power to tackle tough grass and brush, ensuring that your yard work is completed with ease and efficiency. One of its standout features is the Easy Start technology, which significantly reduces the effort required to start the engine. This user-friendly feature allows both seasoned landscapers and newcomers to get the job done without the frustrating pull-start experience.

The CS26 incorporates a lightweight design, weighing in at just around 10 pounds, which enhances maneuverability and reduces operator fatigue during extended use. Its straight shaft design also provides better reach and the ability to navigate around hard-to-reach areas, such as under low-hanging branches or fences.

In terms of cutting capabilities, the Ryobi CS26 is equipped with a durable .095-inch diameter line. This heavy-duty line provides exceptional cutting performance and is designed to withstand the rigors of tough landscaping tasks. The trimmer also features an Easy Reload head, allowing users to quickly and efficiently replace the cutting line without the need for disassembly.

Additionally, the CS26 boasts an adjustable handle that provides comfort and better control while trimming. Users can customize the handle position to fit their preferred working stance, further enhancing the overall user experience. The anti-vibration technology integrated into the design helps to minimize hand fatigue, allowing for longer operation periods without discomfort.

The Ryobi CS26 is not only powerful but also eco-conscious. Its engine design offers lower emissions compared to older models, making it a suitable choice for users who are environmentally aware. The trimmer's capabilities make it ideal for various landscaping tasks, including edging, trimming, and clearing dense brush.

In summary, the Ryobi CS26 gas string trimmer combines power, ease of use, and comfort to create an efficient landscaping tool. With features such as Easy Start technology, a lightweight design, durable cutting line, and adjustable handles, it meets the demands of both homeowners seeking to maintain their lawns and professionals looking for reliable equipment to add to their toolkit. For anyone in search of a dependable string trimmer, the Ryobi CS26 represents an excellent choice that will deliver impressive results.
Top Page Image Contents