Assembly, Add Engine Oil and Fuel | Briggs & Stratton 20288 specs

Section 3: Assembly

Add Engine Oil and Fuel

• Place pressure washer on a level surface.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil and fuel fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

•Refer to engine operator’s manual and follow oil and fuel recommendations and instructions.

NOTE: Check oil often during engine break–in. Refer to engine operator’s manual for recommendations.

Connect Hose and Water Supply to Pump

IMPORTANT: To avoid pump damage, you must assemble the nozzle extension to the spray gun and attach all hoses before you start the engine.

1.Uncoil high pressure hose and attach one end of hose to base of spray gun (Figure 4).Tighten by hand.

Figure 4 — Connect High Pressure Hose to Spray Gun

Connect high pressure hose here

2.Attach other end of high pressure hose to high pressure outlet on pump (Figure 5).Tighten by hand.

Figure 5 — Connect High Pressure Hose to Water Outlet

3.Before connecting garden hose to water inlet, inspect inlet screen (Figure 6). Clean screen if it contains debris or replace if damaged. Refer to “O-Ring Maintenance” section if inlet screen is damaged. DO NOT run pressure washer if inlet screen is damaged.

4.Run water through your garden hose for 30 seconds to clean out any debris.

Figure 6 — Connect Garden Hose to Water Inlet

Inspect inlet screen. DO NOT use if damaged; clean if dirty.

IMPORTANT: DO NOT siphon standing water for the water supply. Use ONLY cold water (less than 100°F).

5.Connect garden hose (not to exceed 50 feet in length) to water inlet.Tighten by hand (Figure 6).

CAUTION

There MUST be at least ten feet of unrestricted garden hose between the pressure washer inlet and any flow shut off device, such as a ‘Y’ shut-off connector or other convenience-type water shut-off valve.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

6.Turn ON water, point gun in a safe direction and squeeze trigger to purge pump system of air and impurities.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear safety goggles when using this equipment or in vicinity of where equipment is in use.

•Before starting the pressure washer, be sure you are wearing adequate safety goggles.

Checklist Before Starting Engine

Review the unit’s assembly to ensure you have performed all of the following.

1.Make sure handle is in place and secure.

2.Check that oil has been added to proper level in engine crankcase.

3.Add proper fuel to fuel tank.

4.Check for properly tightened hose connections.

5.Check to make sure that there are no kinks, cuts, or damage to the high pressure hose.

6.Provide a proper water supply at an adequate flow.

7.Be sure to read “Safety Rules” and “How To Use Your Pressure Washer” before using the pressure washer.

20288 specifications

Briggs & Stratton 20288 is a powerful and efficient portable generator designed to provide reliable backup power for home use, job sites, or outdoor activities. Known for its durable construction and innovative technologies, the model stands out as an ideal choice for consumers looking for both performance and convenience.

One of the main features of the Briggs & Stratton 20288 is its robust engine. Powered by the reliable Briggs & Stratton 306cc engine, this generator delivers a starting wattage of 7000 watts and a running wattage of 5500 watts. This capacity makes it suitable for running multiple appliances simultaneously, including refrigerators, lights, and power tools, making it a valuable asset during power outages or on worksites.

The generator is equipped with an advanced inverter technology, which provides clean, stable power output that is safe for sensitive electronics such as laptops, smartphones, and televisions. This feature ensures that you can confidently use your valuable devices without the risk of damage from voltage fluctuations. Furthermore, the inverter technology also allows for a quieter operation compared to traditional generators, making it ideal for residential areas or camping scenarios.

In addition to its power and technology, the Briggs & Stratton 20288 is built for durability and convenience. Its steel frame construction ensures that it can withstand the rigors of outdoor use while providing stability. The generator also features a foldable handle and never-flat wheels that enhance portability, allowing users to transport it with ease.

The generator includes several user-friendly features, such as an easy-to-read LED display that provides vital information such as remaining run time, power output, and maintenance reminders. The electric start function adds to the convenience, enabling users to start the generator quickly with the push of a button.

Safety is prioritized in the design of the Briggs & Stratton 20288. It is fitted with an automatic low-oil shutdown feature, which protects the engine from damage by stopping operation when oil levels are low. This, combined with a reliable fuel efficiency, ensures that users get optimal performance with minimal operational hassles.

Overall, the Briggs & Stratton 20288 portable generator combines impressive power, advanced technologies, and practical features, making it an excellent choice for individuals seeking a reliable generator that meets a variety of power needs while being easier to transport and operate.