Zenoah G621AVS manual Chain Saws Limited Warranty

Page 60

CHAIN SAWS LIMITED WARRANTY

EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY, RedMax / ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE,

FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.

EMISSION-RELATED PARTS ARE:

THE CARBURETOR ASSEMBLY, COIL ASSEMBLY, ROTOR, SPARKPLUG,

AIR FILTER, FUEL FILTER, INTAKE MANIFOLD, AND THE GASKETS

ALL OTHER PARTS EXCEPT ABOVE PARTS, FOR TWO (2) YEARS OF HOME USE AND 180 DAYS COMMERCIAL USE, FROM THE DATE OF ORIGINAL PURCHASE, THE COMPANY, THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL PURCHASER, ANY PART OF PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. THIS IS THE EXCLUSIVE REMEDY.

THE PURCHASER SHALL BEAR COSTS OF TRANSPORTING THE UNIT TO AND FROM THE RedMax DEALER.

THE PURCHASER SHALL NOT BE CHARGED FOR DIAGNOSTIC LABOR WHICH LEADS TO THE DETERMINATION THAT A WARRANTED PART IS DEFECTIVE, IF THE DIAGNOSTIC WORK IS PERFORMED AT THE RedMax DEALER.

THE PURCHASER OR OWNER IS RESPONSIBLE FOR THE PERFORMANCE OF THE REQUIRED MAINTENANCE AS DEFINED BY THE MANUFACTURER IN THE OWNER/OPERATOR MANUAL.

ANY WARRANTED PART WHICH IS NOT SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE, OR WHICH IS SCHEDULED ONLY FOR REGULAR INSPECTION TO THE EFFECT OF "REPAIR OR REPLACE AS NECESSARY" SHALL BE WARRANTED FOR THE WARRANTY PERIOD. ANY WARRANTED PART WHICH IS SCHEDULED FOR REPLACEMENT AS REQUIRED MAINTENANCE SHALL BE WARRANTED FOR THE PERIOD OF TIME UP TO THE FIRST SCHEDULED REPLACEMENT POINT FOR THE PART.

ANY REPLACEMENT PART THAT IS EQUIVALENT IN PERFORMANCE AND DURABILITY MAY BE USED IN NON- WARRANTY MAINTENANCE OR REPAIRS, AND SHALL NOT REDUCE THE WARRANTY OBLIGATION OF THE COMPANY.

THE COMPANY IS LIABLE FOR DAMAGES TO OTHER ENGINE COMPONENTS CAUSED BY THE FAILURE OF A WARRANTED PART STILL UNDER WARRANTY.

THE WARRANTY DOES NOT APPLY TO THOSE UNITS WHICH HAVE BEEN DAMAGED BY NEGLIGENCE OF INSTRUCTION LISTED IN THE OWNER/OPERATOR MANUAL FOR PROPER USE AND MAINTENANCE OF THE UNITS, ACCIDENTAL MISHANDLING, ALTERATION, ABUSE, IMPROPER LUBRICATION, USE OF ANY PARTS OR ACCESSORIES OTHER THAN THOSE SPECIFIED BY THE COMPANY, OR OTHER CAUSES BEYOND THE COMPANY'S CONTROL.

THIS WARRANTY DOES NOT COVER THOSE PARTS REPLACED BY NORMAL WEAR OR HARMLESS CHANGES IN THEIR APPEARANCE.

THERE ARE NO OTHER EXPRESS WARRANTIES.

IMPLIED WARRANTIES INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO TWO (2) YEARS FOR HOME USE AND 180 DAYS FOR COMMERCIAL USE, FROM THE ORIGINAL DELIVERY DATE.

LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE UNDER ANY AND ALL WARRANTIES ARE EXCLUDED.

SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

IF YOU NEED TO OBTAIN INFORMATION ABOUT THE NEAREST SERVICE CENTER, PLEASE CALL RedMax / ZENOAH AMERICA, INC. AT (770)-381-5147.

IMPORTANT: YOU WILL RECEIVE A WARRANTY REGISTRATION CARD AT TIME OF PURCHASE.PLEASE FILL OUT THE CARD AND SEND IT TO RedMax / ZENOAH AMERICA WITHIN SEVEN (7) DAYS. BE SURE TO KEEP A COPY FOR YOUR RECORDS.

ZENOAH AMERICA, INC.

1100 Laval Blvd. Suite 110

Lawrenceville, Georgia 30043

Page 59 Page 61
Image 60
Page 59 Page 61
Contents G621AVS Contents Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOI Tables des matieres ContenidoAdvertencias Contenidas EN EL Manual Specifications G621AVS Power unitParts location Emplacement des pieces Situación de las piezas Fiche techniqueEspecificaciohes G621AVS Groupe moteurRead operators instruction book before Operating this machineUse the chain saw with two hands Read, understand and follow all warningsSujete siempre la motosierra con ambas manos Symbols on the machine Emission ControlInformation du moteur importante Control de emisionesFor safe operation Consignes de securite Instrucciones de seguridad For safe operation Consignes de securite Instrucciones de seguridad Kickback Safety Precautions for Chain SAW Users Consignes de securite Instrucciones de seguridad For safe operation Consignes de securite Instrucciones de seguridad Installing guide bar and saw chain F6-1 F6-2 F6-3Chain cover Tensioner nut Moving DirectionCarter de chaîne Ecrou de tendeur Sens de rotationDesserrer Serre Cubierta de la cadena Tuerca del tensorWhen using RedMax/ZENOAH genuine oil Fuel and chain oilRecommended Mixing Ratio Gasoline 50OIL Rapport DE Melange Recommande Essence 50 Huile Lors de l’utilisation de la véritable huile RedMax/ZENOAHProporción DE LA Mezcla Recomendada Gasolina 50 Aceite Al utilizar el aceite auténtico de RedMax/ZENOAHHOW to MIX Fuel Fueling the UnitComment Obtenir UN BON Melange Como Mezclar EL Combustible Remplissage DU ReservoirAbastecimiento DE LA Unidad For Your Engine LIFE, Avoid Chain OILEviter Pour Prolonger LA Duree DE VIE DU Moteur Para Contribuir a LA Vida Útil DEL MOTOR, EviteHuile Pour Chaîne Aceite Para LA Cadena Operation F8-1 F8-2 F8-3 F8-4 F8-5Starting Engine Démarrage DU Moteur ArranqueAceite para la cadena Combustible Interruptor Cierre Adjusting Carburetor F8-8 Checking OIL SupplyRéglage DU Carburateur F8-8 Ajuste DEL Carburador F8-8 Icing Prevention System ANTI-FREEZE PartsDispositif DE Prévention Contre LA Congélation Pieces ANTI-GELPiezas Anticongelante How to confirm F8-12 F8-13 F8-14Chain Brake Front handle Released Braking Brake leverArrêt DU Moteur Apagado DEL MotorSawing Guard Against Kickback F9-1Mesures DE Protection Contre LES Rebonds F9-1 Protección Contra Contragolpe F9-1Felling a Tree F9-2 Travail à la tronçonneuse Utilización de la motosierra Abattage D’UN Arbre F9-2 Talado DE Árboles F9-2Log lying on the ground F9-3 Log hanging off the ground F9-4Cutting Limb of Fallen Tree F9-5 Tronc reposant sur le sol F9-3 Tronc en surélévation F9-4Ebranchage d’un arbre abattu F9-5 Elagage d’un arbre F9-6Maintenance Maintenance After Each USEOiling port Oiling port Guide barEntretien Apres Chaque Utilisation Mantenimiento Después DE Cada USOPeriodical Service Points Cylinder finsFuel filter Entretien Periodique Puntos DE Servicio PeríodicoReplacement plug Champion RCJ-7Y or NGK BPM7A Sprocket Spark plugSpark arrester Front and Rear dampersBougie BujíaPare-étincelles ParachispasMaintenance of Saw Chain and Guide Bar SAW ChainMéthode et critères d’affûtage Porter des gants de sécurité Avant l’affûtageGuide BAR Oregon BARGB BAR Oregon ChainGUIDE-CHAÎNE Barra GuíaBarra Oregon Barra GBTroubleshooting Guide Case 2. Lack of power/Poor acceleration/ Rough IdlingCase 3. Oil does not come out Guide de dépannage 12. Guía para la localización de averíasCas 1. Défaut de démarrage Caso 1. Falla de arranqueStorage DisposalRangement Mise au rebutG621AVS NotaFig.A-1 Power Unit G621AVS Fig.A-2 Power Unit RCJ7Y Fig.B Carbburetor Fig.D Cutting Head Chain Saws Limited Warranty Garantie limitée des tronçonneuses Garantía Limitada DE LAS Motosierras Page Zenoah AMERICA, INC

G621AVS specifications

The Zenoah G621AVS is a powerful and reliable two-stroke engine designed for a wide range of applications, particularly in the realm of remote-controlled (RC) models and outdoor power equipment. Recognized for its blend of performance, efficiency, and durability, the G621AVS is a popular choice among hobbyists and professionals alike.

One of the standout features of the G621AVS is its displacement of 62cc, which provides a significant power output, making it suitable for various applications including RC helicopters, airplanes, and large-scale gardening equipment. This engine is engineered with a parallel twin-cylinder configuration, allowing for improved torque and smoother operation, which enhances overall performance and responsiveness.

The G621AVS utilizes advanced anti-vibration systems to reduce operational vibrations. This technology ensures user comfort and improves the longevity of the engine components by minimizing wear and tear caused by excessive vibrations. Consequently, operators can enjoy extended periods of use without fatigue, whether they are flying an RC aircraft or operating gardening tools.

Zenoah has also implemented a sophisticated carburetor system in the G621AVS, optimizing fuel efficiency while ensuring high performance. The engine is designed to deliver a stable fuel-air mixture, allowing for consistent power output and reliable starts. This results in lower fuel consumption, which is not only cost-effective but also environmentally friendly, reducing emissions without sacrificing performance.

Another characteristic of the G621AVS is its robust construction. Built with high-quality materials, the engine is designed to withstand harsh operating conditions. The durable design prolongs the lifespan of the engine, giving users confidence in their investment while ensuring dependable operation in various environments.

Easy maintenance is another key feature of the G621AVS. The engine is designed for straightforward access to components, making regular maintenance tasks less time-consuming and more accessible for users. Zenoah provides comprehensive support and resources, ensuring users can efficiently maintain high performance over the life of the engine.

In conclusion, the Zenoah G621AVS stands out in the competitive landscape of two-stroke engines, thanks to its powerful output, advanced technologies, and user-friendly features. Whether used in RC hobbies or professional applications, this engine promises reliability and efficiency, making it a top choice for those seeking performance and durability.
Top Page Image Contents