Genie Z-45, Z-25J manual Test Limited Drive Speed Standard Base Models

Page 35

Fourth Edition · First Printing

Operator's Manual

 

 

 

 

Test Limited Drive Speed - Standard Base Models

36 Press down the foot switch.

37Raise the primary boom approximately 2 feet / 61 cm.

38Slowly move the drive control handle to the full drive position.

Result: The maximum achievable drive speed with the primary boom raised should not exceed 1 foot / 30 cm per second.

39Lower the primary boom to the stowed position.

40Raise the secondary boom approximately 2 feet / 61 cm.

41Slowly move the drive control handle to the full drive position.

Result: The maximum achievable drive speed with the secondary boom raised should not exceed 1 foot / 30 cm per second.

42Lower the secondary boom to the stowed position.

43Extend the primary boom approximately 1 foot / 30 cm.

44Slowly move the drive control handle to the full drive position.

Result: The maximum achievable drive speed with the primary boom extended should not exceed 1 foot / 30 cm per second.

45 Retract the boom to the stowed position.

If the drive speed with the primary boom raised, the secondary boom raised or the primary boom extended exceeds 1 foot / 30 cm per second, immediately tag and remove the machine from service.

Inspections

Test Limited Drive Speed - Narrow Base Models

36 Press down the foot switch.

37Raise the primary boom approximately 2 feet / 61 cm.

38Slowly move the drive control handle to the full drive position.

Result: The maximum achievable drive speed with the primary boom raised should not exceed 6 in / 15 cm per second.

39Lower the primary boom to the stowed position.

40Raise the secondary boom approximately 2 feet / 61 cm.

41Slowly move the drive control handle to the full drive position.

Result: The maximum achievable drive speed with the secondary boom raised should not exceed 6 in / 15 cm per second.

42Lower the secondary boom to the stowed position.

43Extend the primary boom approximately 1 foot / 30 cm.

44Slowly move the drive control handle to the full drive position.

Result: The maximum achievable drive speed with the primary boom extended should not exceed 6 in / 15 cm per second.

45 Retract the boom to the stowed position.

If the drive speed with the primary boom raised, the secondary boom raised or the primary boom extended exceeds 6 in / 15 cm per second, immediately tag and remove the machine from service.

Part No.114339

Z-45/25 • Z-45/25J

33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Owners, Users and OperatorsIntroduction Intended Use Safety Sign MaintenanceIntroduction Hazard Classification Symbol and Hazard Pictorials Definitions Symbol and Hazard Pictorials Definitions General Safety 45/25 Z-45/25J Part No.114339 General Safety General Safety General Safety General Safety Personal Safety Fall Protection Maximum platform capacity Work Area Safety Electrocution HazardsTip-over Hazards Line Voltage Required ClearanceWork Area Safety Maximum allowable side force Ansi & CSA Maximum slope rating, stowed position, 4WD Work Area Safety Operation on Slopes HazardsMaximum slope rating, stowed position, 2WD Collision Hazards Work Area Safety Fall HazardsComponent Damage Hazards Work Area Safety Explosion and Fire HazardsBodily Injury Hazard Damaged Machine HazardsLockout After Each Use Work Area Safety Battery Safety Burn HazardsExplosion Hazard Electrocution HazardPage Platform Control Panel ControlsFourth Edition · First Printing Operators Manual Controls Controls Ground Control Panel Fourth Edition · First Printing Operators Manual Controls Inspections Pre-operation Inspection Fundamentals Inspections Pre-operation Inspection Inspections Function Test Fundamentals At the Ground Controls InspectionsTest Machine Functions Test the Foot SwitchAt the Platform Controls Test the HornTest Drive and Braking Test the Drive Enable SystemTest Limited Drive Speed Narrow Base Models Test Limited Drive Speed Standard Base ModelsTest Aircraft Protection Package if equipped Test the Oscillate Axle oscillating axle-equipped modelsTest the Lift/Drive Select Function if equipped Inspections Workplace Inspection FundamentalsDecal Description Quantity Inspections Inspection for Decals with WordsPart No.114339 45/25 Z-45/25J Inspections Inspection for Decals with Symbols Fourth Edition · First Printing Operators Manual Only use the machine as it was intended Operating Instructions Do Not Operate UnlessAuxiliary Controls Starting the EngineOperating Instructions Emergency StopTo Steer Operating Instructions Operation from GroundOperation from Platform To Position PlatformTo determine the slope grade Run RiseDriving on a slope Drive Speed Select Machine Not Level Indicator Light if equippedDrive Enable Generator if equippedAfter Each Use Operating Instructions Check Engine Light if equippedAircraft Protection Package if equipped Transport and Lifting Instructions Observe and Obey Free-wheel Configuration for WinchingSecuring the Chassis Securing to Truck or Trailer for TransitTransport and Lifting Instructions Securing the Platform Z-45/2545/25J Lifting InstructionsAxis Axis 45/25Ford DSG-423 EFI Engine EPA Compliant Maintenance Check the Engine Oil LevelMaintenance Symbols Legend Perkins 404C-22 EngineCheck the Engine Coolant Level Ford and Perkins Models Maintenance Check the Hydraulic Oil LevelHydraulic oil specifications Tire specifications 2WD Models 4WD Models Maintenance Check the BatteriesMaintenance Scheduled Maintenance Floor loading information SpecificationsStandard Base Models 45/25 no jib Standard Base Models 45/25J jib Maximum slope rating, stowed position Narrow Base Models 45/25 no jibNarrow Base Models 45/25J jib 45/25J Range of Motion 45/25 Range of Motion

Z-45, Z-25J, Z-45, Z-25 specifications

The Genie Z-45, Z-25, and Z-25J are pivotal equipment models in the realm of articulating boom lifts, renowned for their efficiency and versatility in various applications. Each model boasts a unique set of features, ensuring they cater to different operational needs across industries such as construction, maintenance, and industrial services.

The Genie Z-45, a robust articulating boom lift, stands out for its impressive working height of 51 feet and horizontal reach of 26 feet. It incorporates advanced hydraulic technology, allowing precise movements and smooth transitions when reaching elevated areas. The Z-45 is powered by a reliable 4WD drivetrain, enabling it to maneuver through rugged terrain with ease. It features a 180-degree rotating platform, enhancing its capability to position operators optimally for their tasks. The machine's compact design allows it to be easily transported and utilized in tight spaces, making it an excellent choice for congested job sites.

On the other hand, the Genie Z-25 shines in its compactness, achieving a maximum working height of 30 feet. With a horizontal reach of 20 feet, it is ideal for indoor environments and areas with limited access. It is equipped with a zero-degree turning radius, allowing for exceptional maneuverability. The Z-25's lightweight design and reliable electric and diesel engine options make it versatile for various applications. This model is particularly valued for its quiet operation and environmentally friendly features, making it an excellent fit for urban job sites where noise restrictions may apply.

Meanwhile, the Genie Z-25J is a noteworthy variant, combining the beneficial characteristics of the Z-25 with additional features suitable for tougher conditions. Like the Z-25, it offers great performance in confined spaces but with enhanced durability and functionality. It incorporates advanced technology, including an intuitive control system that simplifies operation even for novice users. The Z-25J is ideal for tasks requiring flexibility and reliability, such as maintenance work in elevated and hard-to-reach areas.

Each of these Genie models represents a commitment to innovation, durability, and efficiency, ensuring that operators are equipped with the best possible tools to tackle their projects safely and effectively. From the robust Z-45 to the compact Z-25 and the versatile Z-25J, Genie continues to lead the way in providing the ideal solutions for various lifting tasks.
Top Page Image Contents