Briggs & Stratton 71013 manual Introduction, For the Home Owner, Owner Orientation

Page 5

Introduction

Your Briggs & Stratton Power Management System is supplied with this combined “Installation and Operator’s Manual”. This is an important document and should be retained by the owner after the installation has been completed.

Every effort has been expended to make sure that the information in this manual is both accurate and current. However, the manufacturer reserves the right to change, alter or otherwise improve the system at any time without prior notice.

For the Home Owner

To help you make informed choices and communicate effectively with your installation contractor(s),

Read and understand the Owner Orientation Section of this manual before contracting or starting your power management system installation.

To arrange for proper installation, contact the store at which you purchased your power management system, your dealer, or your utility power provider.

The power management system warranty is VOID

unless the system is installed by a licensed electrical professional.

Owner Orientation

The illustrations provided are for typical circumstances and are meant to familiarize you with the installation options available with your power management system.

Local codes, appearance, and distances are the factors that must be considered when negotiating with an installation professional. As the distance from the existing electrical service increases, compensation in wiring materials must be allowed for. This is necessary to comply with local codes and overcome electrical voltage drops.

The factors mentioned above will have a direct effect on the overall price of your power management system installation.

NOTE: Your installer must check local codes AND obtain permits before installing the system.

•Read and follow the instructions given in this manual.

•Follow a regular schedule in caring for and using your power management system, as specified in this manual.

Installer Responsibilities

•Read and observe the safety rules.

•Read and follow the instructions given in this manual.

•Check federal, state and local codes.

•Consult with owner to determine loads to be controlled and their priorities.

NOTE: A worksheet for determining which loads are to be transferred and their priorities is provided on page 9.

•The installer may need to provide appropriate rated contactors based on loads to be controlled.

Equipment Description

The power management system is designed to control

six priority loads and up to two air conditioner loads that are being supplied by power from the home standby system. This power management system goes into a STANDBY mode and does not control any loads when utility power is present.

The power management system consists of a relay board with 6 relays to control loads rated up to 120 VAC, 20 Amps, 1 hp, and a control module that has 2 relays for central air conditioner loads. The circuit boards are housed in a NEMA 3R enclosure that is suitable for both indoor and outdoor installations.

Two (2) current transformers monitor generator current at the transfer switch to ensure that the loading of the generator does not exceed 85 percent. Should load exceed 85 percent, the power management system will shed loads to keep the generator from overloading. The power management system will add load back once sufficient current is available.

The control module has a green LED for each relay to indicate when the relays are supplying power to the loads when on generator power. There is also a status LED that flashes when the power management system is functioning properly.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents BRIGGSandSTRATTON.COM Call Helpline800 743-4115M-F 8-5 CT Power Management System Where to Find UsTable Of Contents Important Safety Instructions Introduction Installer ResponsibilitiesFor the Home Owner Owner OrientationShipment Contents InstallationUnpacking Mounting GuidelinesPower Wiring Interconnections You must perform the following before operating the system System SetupOperation Testing the Power Management SystemControls Wiring Decal 240VAC Electrical Appliances Electrical Load Worksheet PriorityWhen Calling the Factory MaintenanceSpecifications Relay ContactsSupplying power TroubleshootingProblem Cause Correction Items Not Illustrated Illustrated Parts ListDescription Limited Warranty Reserved Llamada Línea Directa Manual de Instalación y del OperarioFecha de compra Dónde encontrarnosSistema de Gestión de Energía Especificaciones MandosMantenimiento Conserve estas instrucciones Para el Propietario Doméstico IntroduccionOrientación para el Propietario Responsabilidades del InstaladorDesempaque InstalacionPautas de Montaje Inspección al Momento de la EntregaInterconexiones de Cableado de Energía Configuración del Sistema Prueba del sistema de gestión de energía eléctrica MandosSistema Funcionamiento Alambrar la calcomanía Hoja de trabajo de cargas eléctricas Mantenimiento DimensionesSi Necesita Llamar a Fábrica EspecificacionesLos terminales Problemo Causa AccionReparacion de Averias Garantia 800 743-4115 M-F8-5 CT BRIGGSandSTRATTON.COM Guide dInstallation Et dUtilisationDate d’achat Où nous trouverSystème de Gestion de L’alimentation Caractéristiques CommandesEntretien Directives de sécurité importantes Instalación FonctionnementCommandesSécurité Dépannage GarantieAu Propriétaire Résidentiel Responsabilités de lInstallateurConseils au Propriétaire Description de lÉquipementSécurité Instalación Commandes Consignes dinstallationDéballage Vérification de la LivraisonContrôleur dans le commutateur de transfert Interconnexions du câblage dalimentationSécurité Instalación Commandes Fonctionnement Configuration du systèmeMise à lessai du système de gestion de lalimentation CommandesFonctionnement Décalcomanie dinstallation éléctrique Fiche technique de charge électrique Si vous Devez Communiquer avec lUsine EntretienCaractéristiques Valeur nominale desDépannage Fonctionnement Entretien Garantie

71013 specifications

The Briggs & Stratton 71013 is a highly regarded product in the realm of outdoor power equipment, specifically designed to offer reliable performance with a robust set of features. This model showcases the brand's commitment to quality engineering, making it an excellent choice for both residential and commercial applications.

One of the standout features of the Briggs & Stratton 71013 is its portable power generation capability. This model is equipped with a powerful engine that delivers ample wattage, making it suitable for various power needs, whether for camping trips, outdoor events, or backup for home appliances during outages. Thanks to its efficient fuel consumption, users can count on prolonged runtime, enhancing its practicality in emergency situations.

The 71013 utilizes advanced technology for ease of use. For instance, the unit often incorporates a convenient electric start option, allowing hassle-free starting even in cold weather conditions. The intuitive control panel is designed with user-friendliness in mind, enabling operators to monitor power output and manage usage easily.

In terms of durability, the Briggs & Stratton 71013 is designed to withstand the elements. Its rugged frame is crafted from high-quality materials, ensuring that it can endure rough handling and inclement weather. Additionally, the model features heavy-duty wheels for easy mobility across various terrains, making it a versatile option for users.

Maintenance has been simplified with the inclusion of user-friendly features. The engine's design allows for easy access to key components, making routine maintenance tasks straightforward. This focus on convenience extends to the air filter and oil replacement systems, which are user-friendly and ensure the longevity of the equipment.

Furthermore, safety features are integrated into the Briggs & Stratton 71013 to protect users and equipment alike. A built-in circuit breaker helps to prevent overloads, ensuring safe operation. The design also emphasizes low noise levels, making it suitable for residential areas without causing disturbances.

In summary, the Briggs & Stratton 71013 stands out with its powerful engine, portable design, user-friendly features, and robust safety measures. Whether for emergency power needs or outdoor activities, this model is engineered to deliver reliability and performance, solidifying its place as a trusted companion for power generation.
Top Page Image Contents