Follow the pairing instructions..
I want to reset the pairing list on my speakerphone
-The speakerphone registers a list of up to 7 mobile phones.. To remove the list, press and hold the Answer/End button, Volume up button and FM button at the same time.. A beep indicates the list was removed from the speakerphone memory.. The next time you power on, the speakerphone will go into pairing mode as the first time you powered your new SP700 on..
Will the Jabra SP700 work with other Bluetooth equipment?
-The Jabra SP700 is designed to work with Bluetooth mobile phones.. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1..1 or higher and support a headset,
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to support a
I can not connect speakerphone and radio via FM transmitter
-Make sure the radio is turned on and speakerphone is in FM mode (FM Status Icon is on)..
-If your radio when searching is not able to find the FM fre- quency set by your speakerphone, the FM frequency must be tuned in manually on the radio.. Please read radio manual to find out how to manually change frequency on your radio..
-If your radio is in TA (Traffic Announcement) mode, switch TA off and your radio should be able to find your speakerphone when using the search function on the radio.. If not tune in manually..
-The sensitivity of the search function on your radio determines whether it is able to find the frequency set by your speaker- phone.. On some radios you are able to adjust the sensitivity thus making it possible to find the speakerphone frequency when searching.. If not tune in manually..
-In urban areas it might be difficult to find a clear frequency.. It is therefore advisable to use a frequency in the lower or upper end of the FM frequency band (e..g.. 88..1 or 107,7 MHz) where you will have the best chance to find a clear frequency..
english
Jabra SP700 | 14 |