Sears 247.88355 operating instructions Operation, Maintenance & Storage

Page 5

SAFETY INSTRUCTIONS

Operation

•Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with the rotating parts can amputate hands and feet.

•The auger/impeller control lever is a safety device. Never bypass its operation. Doing so makes the machine unsafe and may cause personal injury.

•The control levers must operate easily in both directions and automati- cally return to the disengaged position when released.

•Never operate with a missing or damaged chute assembly. Keep all safety devices in place and working.

•Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

•Do not operate machine while under the influence of alcohol or drugs.

•Muffler and engine become hot and can cause a burn. Do not touch.

•Exercise extreme caution when operating on or crossing gravel surfaces. Stay alert for hidden hazards or traffic.

•Exercise caution when changing direction and while operating on slopes.

•Plan your snow-throwing pattern to avoid discharge towards windows, walls, cars etc. Thus, avoiding possible property damage or personal injury caused by a ricochet.

•Never direct discharge at children, bystanders and pets or allow anyone in front of the machine.

•Do not overload machine capacity by attempting to clear snow at too fast of a rate.

•Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk, never run.

•Disengage power to the auger/impeller when transporting or not in use.

•Never operate machine at high transport speeds on slippery surfaces. Look down and behind and use care when backing up.

•If the machine should start to vibrate abnormally, stop the engine, disconnect the spark plug wire and ground it against the engine. Inspect thoroughly for damage. Repair any damage before starting and operat- ing.

•Disengage all control levers and stop engine before you leave the operating position (behind the handles). Wait until the auger/impeller comes to a complete stop before unclogging the chute assembly, making any adjustments, or inspections.

•Never put your hand in the discharge or collector openings. Always use the clean-out tool provided to unclog the discharge opening. Do not unclog chute assembly while engine is running. Shut off engine and remain behind handles until all moving parts have stopped before unclogging.

•Use only attachments and accessories approved by the manufacturer (e.g. wheel weights, tire chains, cabs etc.).

•If situations occur which are not covered in this manual, use care and good judgment. Contact your Sears Service Center for assistance.

Maintenance & Storage

•Never tamper with safety devices. Check their proper operation regularly. Refer to the maintenance and adjustment sections of this manual.

•Before cleaning, repairing, or inspecting machine disengage all control levers and stop the engine. Wait until the auger/impeller come to a complete stop. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

•Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage.

•Do not change the engine governor setting or over-speed the engine. The governor controls the maximum safe operating speed of the engine.

•Snow thrower shave plates and skid shoes are subject to wear and damage. For your safety protection, frequently check all components and replace with original equipment manufacturer’s (OEM) parts only. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!”

•Check controls periodically to verify they engage and disengage properly and adjust, if necessary. Refer to the adjustment section in this operator’s manual for instructions.

•Maintain or replace safety and instruction labels, as necessary.

•Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

•Prior to storing, run machine a few minutes to clear snow from machine and prevent freeze up of auger/impeller.

•Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer etc.

•Always refer to the operator’s manual for proper instructions on off-season storage.

Do not modify engine

To avoid serious injury or death, do not modify engine in any way. Tampering with the governor setting can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory setting of engine governor.

Notice Regarding Emissions

Engines which are certified to comply with California and federal EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline, and may include the following emission control sys- tems: Engine Modification (EM) and Three Way Catalyst (TWC) if so equipped.



Page 4 Page 6
Image 5
Page 4 Page 6
Contents 2007 Operator’s ManualProduct Specifications Model Number Table of ContentsWarranty Statement Repair Protection Agreement Preparation Safety InstructionsTraining Operation Maintenance & StorageThis page left intentionally blank USE CLEAN-OUT Tool to Unclog Discharge Chute Safety LabelsAssembly AssemblyRemoving From Carton Loose PartsAssembly Chute Clean-Out Tool AdjustmentsSet-Up Tire PressureAuger Control Chute AssemblyEngine Controls OperationShift Lever Ignition KeyThrottle Control Chute AssemblyRecoil Starter Handle Electric Starter ButtonStarting The Engine Clean-Out ToolBefore Starting Engine Stopping The Engine Replacing Shear PinsTo Engage Drive To Engage AugersChanging Engine Oil Service and MaintenanceChecking Engine Oil Lubrication Drive Control Shave Plate and Skid ShoesAuger Belt Belt ReplacementChute Bracket Drive Belt Friction Wheel Removal Service and Maintenance Each Use Engine oil level Check Gas in the tank † Under heavy load or in high temperaturesPreparing Engine OFF-SEASON StoragePreparing Snow Thrower Short-Term StorageTroubleshooting Craftsman Snow Thrower Model Parts ListDescription 103 749-04138A Handle, Lower Parts List 34 -00207A Guide Bracket, Drive Cable 790-00316 Craftsman Engine Model LH195SP-67514 For Snow Thrower Model 35883 Baffle Extension 650802 Screw, 1/4-20 x 5/8 Ref. No Description 640084B This page applicable in the U.S.A. and Canada only Sears Emission Control Defects Warranty CoveragePage Declaración DE Garantía ÍndiceEspecificaciones DEL Producto Número DE ModeloAcuerdo DE Protección Para Reparaciones Preparativos Instrucciones DE SeguridadCapacitación Mantenimiento y almacenamiento OperaciónExtracción de la unidad de la caja MontajePartes sueltas MOntajeSitúe el montaje del canal sobre la base. Vea la figura Ajustes ConfiguraciónHerramienta de Limpieza del Canal Presión de los neumáticosVuelva a apretar la tuerca hexagonal superior Ajuste del montaje del canalPrueba de control de la barrena Operación Palanca de cambios Llave de encendidoControles del motor Control de obturaciónManija del arrancador de retroceso Control del estranguladorBotón del arrancador eléctrico Salida del arrancador eléctricoEncendido del motor Herramienta de limpiezaAntes de encender el motor Procedimiento para engranar la transmisión Detención del motorProcedimiento para engranar las barrenas Arrancador de retrocesoMantenimiento de Motor Servicio Y MantenimientoTapón para drenado de aceite Control del aceite del motorLubricación Eje de la barrena Placa de raspado y zapatas antideslizantesControl de la transmisión Para retirar las zapatas antideslizantesSoporte del canal Reemplazo de la correaControl de la barrena La Correa de la barrenaLa correa de la transmisión Extracción de la rueda de fricción Nota Tenga cuidado de no dañar las roscas del eje Tanque † Bajo carga pesada o en temperaturas altas Cada Uso Nivel del aceite de motor ComprobarPreparación del motor Almacenamiento Fuera DE TemporadaPreparación de la máquina quitanieve Almacenaje a Corto plazoSolución DE Problemas Piezas con garantía Esta página se aplica sólo en EE.UU. y CanadáMotor certificado Notas Notas Get it fixed, at your home or ours

247.88355 specifications

Sears model 247.88355 is a notable example of an advanced snowblower designed to provide efficient snow removal during harsh winter months. This product, part of Sears’ well-respected line of outdoor power equipment, embodies a perfect combination of innovative technologies, rugged construction, and user-centric features aimed at tackling even the most challenging snowy conditions.

One of the standout features of the Sears 247.88355 is its impressive performance engine. This model typically comes equipped with a powerful four-cycle engine, delivering robust horsepower that ensures it can handle heavy, wet snow and ice without any difficulty. This engine is complemented by a self-propelled system, allowing users to maneuver the snowblower with ease, reducing the physical strain often associated with snow removal tasks.

The construction of the Sears 247.88355 is another notable characteristic, with a durable steel frame that promises longevity and reliability. The auger, crafted from high-strength materials, efficiently breaks up and displaces snow, while the oversized rubber-edged auger allows for precise snow clearing. The design minimizes the chances of clogging, making it suitable for various types of snow conditions.

User comfort is also a priority in the design of the 247.88355. The Snowblower typically features ergonomic controls, which are engineered to minimize fatigue during prolonged use. Additionally, the adjustable handlebars ensure proper height for different users, allowing for an easy and comfortable grip while operating the machine.

The Sears 247.88355 incorporates advanced throw distance capabilities, allowing users to direct the snow where they want it. With adjustable deflector controls, operators can alter snow discharge heights and distances, making it effective for various environments, ranging from small driveways to larger open areas.

Furthermore, the snowblower is designed for ease of maintenance, with accessible components that facilitate routine checks and repairs. This thoughtful approach to user experience ensures that the Sears 247.88355 remains a reliable choice for homeowners seeking a dependable solution for snow management during winter months.

In summary, the Sears 247.88355 stands out due to its powerful engine, sturdy construction, user-friendly features, and advanced performance technologies. These characteristics make it a preferred option for anyone facing snowy conditions, ensuring that winter does not hinder mobility or outdoor activities.
Top Page Image Contents