Swim'n Play end deck manual END Decks

Page 1

ASSEMBLY INSTRUCTIONS

12ft.

15ft.

18ft.

END

DECKS

READ THROUGH AND UNDERSTAND ALL THE STEPS TO THIS INSTALLATION BEFORE

ATTEMPTING TO INSTALL EITHER YOUR POOL OR YOUR DECK.

IF YOUR POOL IS ALREADY INSTALLED IT MAY BE NECESSARY TO LOWER THE WATER LEVEL IN YOUR POOL DOWN TO 2’ TO ENABLE YOU TO PROPERLY INSTALL THIS DECK.

313 REGINA AVENUE

RAHWAY, NEW JERSEY 07065-4891

Phone: (732) 574-1500

Fax: (732) 574-1551

www.swimnplay.com

E-mail: info@swimnplay.com

DANGER

DO NOT DIVE OR JUMP into your pool. Your pool is approximately 4' deep. It is not designed for diving or jumping. If you dive or jump into your pool you run the risk of permanent injury or death. Alert all visitors and family of this and point out all warning labels supplied.

ADULT SUPERVISION REQUIRED

Part # 420867

Image 1
Contents END Decks Decks are Made for 52 Inch Deep Pools GeneralAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #5 CLOSE-UP #3CLOSE-UP #4 Bottom Support Channel Close UP #7 12’ END DeckClose UP #11 Close UP #10Close UP #12 Close UP #13CLOSE-UP #15 Location C Location a Close UP #4 Close UP #17Close UP #17 Close UP #11 15’ END Deck 18’ END Deck12’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction