Swim'n Play end deck manual CLOSE-UP #3, CLOSE-UP #5, CLOSE-UP #4

Page 5

DECK TOP

HEX

NUTS

CLOSE-UP #3

DECK TOP

HEX

NUTS

CLOSE-UP #5

2” SCREWS

CLOSE-UP #4

LONG POST

DECK TOP

SHORT ANGLE

SUPPORT BAR

1/2”

SCREWS

1/2”

SHEET METAL SCREW

49-5/16” POST

2” SCREWS

LONG POST

HEX

NUTS

Finally, attach another Long Square Post for the Ladder on either side of your deck in the location illustrated for your deck on the prior page.

Choose the location of your ladder depending on which side of the deck will provide the most convenient access to the pool.

Fasten this Post to the deck referring to Close-Up #5 above for the proper assembly procedure.

5

Image 5

Contents END Decks Decks are Made for 52 Inch Deep Pools GeneralAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #4 CLOSE-UP #3CLOSE-UP #5 Bottom Support Channel Close UP #7 12’ END DeckClose UP #11 Close UP #10CLOSE-UP #15 Close UP #13Close UP #12 Location C Location a Close UP #17 Close UP #11 Close UP #17Close UP #4 12’ END Deck 18’ END Deck15’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction