Swim'n Play end deck manual Standard Post Fence Braket Inserted Through Post

Page 17

13

END POST

OR

CORNER POST

Attach the Universal Fence Brackets to the top of the End or Corner Posts simply by inserting the oval end into the slot in the Post and pressing down as shown.

Next, press one Post Cap to the top of each Post.

STANDARD POST

FENCE BRAKET

INSERTED

THROUGH POST

Attach the Straight Fence Brackets to the top of the Standard Posts simply by inserting the shorter end through the slots in the Post until it stops.

Next, press one Post Cap to the top of each Post.

14

Using the illustration for your size deck on the previous page, assemble

 

the Fence Postions. Note carefully the location for the different sizes.

 

Attach the Fence portions to the Fence Brackets using the ½” Sheet

 

Metal Screws as illustrated below. Slip a protective Rubber Screw

Ruber Cap

 

Cap on the exposed end of each screw.

1/2" Sheet

Metal Screw

1/2” SHEET

VIEWED FROM OUTSIDE OF POOLMETAL SCREW

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents END Decks Decks are Made for 52 Inch Deep Pools GeneralAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #4 CLOSE-UP #3CLOSE-UP #5 Bottom Support Channel Close UP #7 12’ END DeckClose UP #11 Close UP #10CLOSE-UP #15 Close UP #13Close UP #12 Location C Location a Close UP #17 Close UP #11 Close UP #17Close UP #4 12’ END Deck 18’ END Deck15’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction
Top Page Image Contents