Swim'n Play end deck manual 15’ END Deck 18’ END Deck

Page 4

2

IMPORTANT: ONLY HAND TIGHTEN SCREWS AT THIS TIME

Elevate your two outside deck sections using either patio blocks or saw horses.

Attach the Posts referring to the Close-up Illustrations below and on the following page for the proper assembly procedure for each location.

ONLY HAND TIGHTEN THE SCREWS at this time.

CLOSE-UPS	CLOSE-UP #3
#2a & #2b

CLOSE-UP	POST FOR LADDER
#5	ATTACHES ON
	ATTACHES ON	CLOSE-UP #4
	EITHER SIDE	CLOSE-UP #4
	EITHER SIDE

CLOSE-UP #3

POOL

CLOSE-UPS	CLOSE-UP #3
#2a & #2b

CLOSE-UP	POST FOR LADDER
#5	ATTACHES ON
	ATTACHES ON	CLOSE-UP #4
	EITHER SIDE	CLOSE-UP #4
	EITHER SIDE

CLOSE-UP #3

POOL

CLOSE UP #2a

CLOSE-UPS

#2a & #2b

15’ END DECK

&

18’ END DECK

CLOSE-UP #3

CLOSE-UPS

#2a & #2b

12’ END DECK

CLOSE-UP #3

CLOSE UP #2b

HEX

HEX

NUTS

NUTS

1/2”

SCREWS

CORNER POST

BRACKET

HEX	2” SCREWS
NUTS

CORNER

POST

LONG BRACKET

POST

1/4” x 20 x 2”	1/4” x 20	1/4” x 20 x 1/2”	1/2” SHEET
TRUSS HEAD SCREW	HEX NUT	TRUSS HEAD SCREW	METAL SCREW

4

Image 4

Contents END Decks General Decks are Made for 52 Inch Deep PoolsAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #5 CLOSE-UP #3CLOSE-UP #4 Bottom Support Channel 12’ END Deck Close UP #7Close UP #10 Close UP #11Close UP #12 Close UP #13CLOSE-UP #15 Location C Location a Close UP #4 Close UP #17Close UP #17 Close UP #11 15’ END Deck 18’ END Deck12’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction