Swim'n Play end deck manual Take the Verticals and attach two Fence Post Brackets to

Page 15

10

Take the Verticals and attach two Fence Post Brackets to

each Vertical using the 1/4 x 20 x 3/4” Screws and Washers

and Hex Nuts provided as shown.

 

You may now assemble your pool.

FENCE POST

BRACKETS

(2 Pieces)

1/4" TRUSS

HEAD SCREW

HEX

NUT

WASHER

VERTICAL

11

Assemble the Square Fence Post to the Post Bracket using the

 

 

¼” x 20 x 2” Screws and Hex Nuts as shown at right. If your

 

pool is equipped with Full-Contoured Covers like those below,

 

you must first assemble the covers to the pool before attaching

 

the Posts.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents END Decks Decks are Made for 52 Inch Deep Pools GeneralAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #3 CLOSE-UP #5CLOSE-UP #4 Bottom Support Channel Close UP #7 12’ END DeckClose UP #11 Close UP #10Close UP #13 Close UP #12CLOSE-UP #15 Location C Location a Close UP #17 Close UP #4Close UP #17 Close UP #11 18’ END Deck 15’ END Deck12’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction
Top Page Image Contents