Swim'n Play end deck manual Close UP #13, Close UP #12, CLOSE-UP #15

Page 9

CLOSE UP #13

DECKDECK

 

LARGE

SMALL

 

ANGLE

CLOSE UP #12

SUPPORT

ANGLE

BAR

SUPPORT

 

 

BAR

5

IMPORTANT: ONLY HAND TIGHTEN SCREWS AT THIS TIME

For the 15’ and 18’ Decks assemble the Center Patio to the already assembled deck sec- tions using the 1” Round Head Screws and Hex Nuts.

For the 12’ Decks assemble the two outside deck sections together using the 1” Round Head Screws and Hex Nuts.

Firmly tighten these screws.

Next, attach the Left Patio and Right Patio sections in the same manner, firmly tightening the screws (let all other screws remain loose at this time).

CENTER

DECKPATIODECK

SECTIONSECTION

(NOT USED

ON 12’ DECK)

 

FOR 18’ DECKS

 

LEFT PATIO

ONLY

RIGHT PATIO

 

LOCATION B

 

 

LOCATION A

 

POOL

For all size decks: At the two places labeled “Location A” in the illustration above, attach Long Square Posts in the manner illustrated at right in Close-up #15.

For the 18’ Decks only: At the two places labeled “Location B” in the illustration above, also attach Long Square Posts in the manner illustrated at right in Close-up #15.

CLOSE-UP #15

HEX

2” SCREWS

NUTS

 

1/4” x 20 x 2”

TRUSS HEAD SCREW

1/4” x 20

1/4” x 20 x 1/2”

HEX NUT

ROUND HEAD SCREW

9

Image 9
Contents END Decks Decks are Made for 52 Inch Deep Pools GeneralAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #3 CLOSE-UP #5CLOSE-UP #4 Bottom Support Channel Close UP #7 12’ END DeckClose UP #11 Close UP #10Close UP #13 Close UP #12CLOSE-UP #15 Location C Location a Close UP #17 Close UP #4Close UP #17 Close UP #11 18’ END Deck 15’ END Deck12’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction