Swim'n Play end deck manual Location C Location a

Page 10

IMPORTANT: ONLY HAND TIGHTEN SCREWS AT THIS TIME

LADDER

18’ END DECK

LOCATION C

LOCATION A

LADDER

15’ END DECK

LOCATION C

LOCATION A

75”

BOTTOM

LADDERANGLES

LOCATION C

LOCATION A

BOTTOM SUPPORT

CHANNEL

1/2” SHEET

METAL

SCREW

BOTTOM

OF POST

1/2” SHEET

METAL SCREW

12’ END DECK

For the 12’ End Deck attach the two 75” Bottom Angles to the bottom of the Posts as shown. Use 1/2” Sheet Metal Screws but only hand tighten at this time.

Image 10

Contents END Decks General Decks are Made for 52 Inch Deep PoolsAssembly Drawings 15’ END Deck 18’ END Deck CLOSE-UP #5 CLOSE-UP #3CLOSE-UP #4 Bottom Support Channel 12’ END Deck Close UP #7Close UP #10 Close UP #11Close UP #12 Close UP #13CLOSE-UP #15 Location C Location a Close UP #4 Close UP #17Close UP #17 Close UP #11 15’ END Deck 18’ END Deck12’ END Deck Fensurround Instructions General Assembly Illustration Take the Verticals and attach two Fence Post Brackets to Fence Posts as described on the next Standard Post Fence Braket Inserted Through Post Swings on to the deck in the direction