Intel 9800758-02 manual Table A-I. BASIC-SO Error Codes Contd

BASIC.80 Error Codes BASIC-80

Table A-I. BASIC-SO Error Codes (Cont'd.)

Error		Description		Number
Missing operand	An operator was given without an operand.			22
line buffer overflow	A program or data line has too many characters			23
	for the line buffer. Divide into two or more parts.
FOR without NEXT	A FOR statement was found without a			24
	corresponding NEXT
FIELD overflow	More than 128 characters were allocated in a			50
	FIELD statement.
Internal error	An error occurred in BASIC-80 internal execution.			51
	If this error cannot be accounted for, contact your
	Intel representative.
Bad file number	An unopened file was referenced.			52
File not found	A LOAD, KILL, or OPEN statement referenced a			53
	file not found on the specified disk.
Bad file mode	One of the following conditions apply:			54
	1.	The file mode is other than I, 0, or R.
	2.	PUT or GET to a sequential file.
	3. Opening a random file for sequential output,
		or vice versa.
	4.	Performing a PRINT to a random file.
File already open	An attempt to open an already opened file was			55
	made.
Disk 1/0 error	A disk 1/0 error has occurred on disk (x); this			57
	means a sector read check failed 18 times.
File already exists	File already exists.			58
Disk full	All disk space is full. Delete old files or try new			61
	disk.
Input past end	An INPUT statement has been given after the			62
	end-of-file; check INPUT operations with the EOF
	function.
Bad record number	The record number in a PUT or GET is >2048 or <O.			63
Bad file name	An invalid ISIS-II filename was given.		64
Direct statement in file	A direct statement was found while loading a		66
	program into BASIC-80. The LOAD is terminated.
Too many files	An attempt to open a new file after 6 files were		67
	opened.

A-2