Changing Color Schemes
After you change display drivers, you may notice that the color scheme used by Windows looks strange. This is because different drivers have different default colors. You can correct this by choosing the same color scheme or a new color scheme. First select the Control Panel from the Main window. Select the Color icon. You will be shown the current color scheme. Choose a new color scheme and click the OK button.
DOS
Driver installation - DOS Setup
1.Install Windows as you normally would for a VGA display. Run Windows to make sure that it is working correctly. Then exit from Windows.
2.Place the Display Driver Diskette #1 in drive A. Type A: <ENTER> to make this the default drive.
3.Type SETUP <ENTER> to run the driver SETUP program. Press any key to get to the applications list.
4.Using the arrow keys, select Windows Version 3.1 and press the <ENTER> key. Press the <ENTER> key to select All Resolutions, then press <END> to begin the installation.
5.At this point you will be asked for the path to your Windows System directory (default C:\WINDOWS). When the installation is complete, press any key to continue. Press <ESC> followed by Y to exit to DOS.
6.Change to the directory where you installed Windows (usually C:\WINDOWS).
7.Type SETUP <ENTER> to run the Windows Setup program. It will show the current Windows configuration. Use the up arrow key to move to the Display line and press <ENTER>.
8.A list of display drivers will be shown. Use the arrow keys to select one of the drivers starting with an asterisk (*) and press <EN- TER>.
68