Intel SBC-455 manual PCM-3660

Installing PC/104 modules

The SBC-455's PC/104 connectors give you the flexibility to attach PC/104 expansion modules. These modules perform the functions of traditional plug-in expansion cards, but save space and valuable slots. Modules include:

•PCM-3810Solid State Disk Module

•PCM-3820High Density Flash Disk Module

•PCM-3110PCMCIA Module

•PCM-3111Secondary PCMCIA Module

•PCM-3610Isolated RS-232 and RS-422/485 Module

• PCM-3660 Ethernet Module

•PCM-371830 KHz A/D Module

•PCM-372448-channel DIO Module

•PCM-3910Breadboard Module

To install these modules on the SBC-455 is a quick and simple operation. The following steps show how to mount the PC/104 modules:

Step1	Remove the SBC-455 from your system paying
	particular attention to the safety instructions already
	mentioned above.
Step2	Make any jumper or link changes required to the CPU
	card now. Once the PC/104 module is mounted, you
	may have difficulty in accessing these.
Step3	Normal PC/104 modules have "male" connectors and
	mount directly onto the main card. However, for
	reasons that ensure better bus matching, the connectors
	on the SBC-455 and the PC/104 module are both
	"female". For this reason you need to plug-in a "male-
	male" adapter (included with the SBC-455). Please refer
	to the following PC/104 module mounting
	diagram on the following page. After this is in place,
	you have the correct mounting connector to accept your
	PC/104 module.

B-84SBC-455 User's Manual