Windows Ô NT 3.51
These drivers are designed to work with MicrosonftÒ WindowsÔ.
Driver installation
1.Install WindowsÔ NT3.51 as you normally would for a VGA display. Run WindowsÔ NT Control Panel from the Main Group. Choose the Display option. In the Display Settings dialog box, click on Change Display Type. Click on Change from the Adapter Type in the Display Type dialog box. Click on Other in the Select Device dialog box.
2.Place the WindowsÔ NT Display Driver Diskette in drive A. Press <ENTER> and the following driver names will appear highlighted in the Models list box:
CHIPS Video Accelerator (64310,65545,65548,65550) CHIPS Video Accelerator (65510,65530,65535,65540)
Click on Install to Install the selected driver. Once the instal lation is complete, shutdown and restart the system.
3.Upon restart, at the Invalid Display Selection message, click on OK and select the desired display settings from the Display Settings dialog box. Click on Test to test the newly selected graphic mode. A color test screen should appear, followed by the Testing Mode window. Click on Yes to contiune. The Display
Settings Change window will appear. Click on Restart Now for the new settings to take effect.
72