Contents |
| |
Quick Start |
| 1 |
Chapter 1 | Hardware Installation and Network Topology | 3 |
Overview | 3 | |
Installation and Setup | 4 | |
Using the Switch | 5 | |
Port status LEDs | 5 | |
Management status LEDs | 6 | |
Cabling Requirements | 7 | |
UTP requirements | 7 | |
Fiber optic requirements | 7 | |
8 | ||
Typical Configurations | 10 | |
Configuring the mixed 10 and 100 Mbps workgroup environment | 10 | |
Configuring the Wide Area Network (WAN) or | 12 | |
Repeater count limitations | 14 | |
Chapter 2 | Configuring and Managing the Switch | 15 |
Accessing the Console Manager | 16 | |
Using the Console Manager | 17 | |
Entering commands | 17 | |
Console Manager command groups | 19 | |
Sample Console Manager Session | 20 | |
Configuring the SNMP agent for IP | 21 | |
Configuring a port for full duplex | 22 | |
Creating Virtual LANs (VLANs) | 23 | |
Monitoring traffic | 25 | |
Chapter 3 | Console Command Reference | 31 |
Console | 32 | |
Console Commands | 38 | |
System Commands | 39 | |
IP Commands | 43 | |
IP configuration | 43 | |
Ping Commands | 46 | |
Address Resolution Protocol (ARP) Commands | 47 |
iii