ViewSonic PJ758/PJ759/PJ760 manual Input Menu, Video Format, Frame Lock, Computer

INPUT Menu

INPUT Menu (continued)

Item

Description

The video format for S-VIDEO port and VIDEO port can be set.

(1)Use the ◄/► buttons to select the input port.

(2)Using the ▲/▼ buttons switches the mode for video format.

	AUTO Ù NTSC Ù PAL Ù SECAM
VIDEO FORMAT	N-PAL Ù M-PAL Ù NTSC4.43

•This item is performed only for a video signal from VIDEO port or S-VIDEO port.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.

	Using the ▲/▼ buttons turns the frame lock function on/off.
	TURN ON Ù TURN OFF
	• This item can be performed only on a computer signal with a
FRAME LOCK	vertical frequency of 50 to 60 Hz.
	• When the TURN ON is selected, a moving pictures are displayed
	more smoothly.
	• This function may cause a certain degradation of the picture. In
	such a case, please select TURN OFF.
	The computer input signal type for COMPUTER IN1 and IN2 ports
	can be set.
	(1) Use the ◄/► buttons to select the input
	port to be set.
	COMPUTER (IN)1 Ù COMPUTER (IN)2
	(2) Use the ▲/▼ buttons to select the
COMPUTER IN	computer input signal type.
	SYNC ON G ON Ù SYNC ON G OFF

Selecting SYNC ON G ON allows reception of sync on Green signal.

•When SYNC ON G ON is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal.

(continued on next page)

ViewSonic 32 PJ758/PJ759/PJ760