ViewSonic PJ758/PJ759/PJ760 manual Picture Menu, Gamma, Color Temp

PICTURE Menu

PICTURE Menu

From the PICTURE menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the

►cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item	Description
BRIGHTNESS	Using the ▲/▼ buttons adjusts the brightness.
	Light Ù Dark
CONTRAST	Using the ▲/▼ buttons adjusts the contrast.
	Strong Ù Weak
	Using the ▲/▼ buttons switches the gamma mode.
	#1 DEFAULT ￿ #1 CUSTOM ￿ #2 DEFAULT ￿ #2 CUSTOM
	￿	￿
	#6 DEFAULT	#3 DEFAULT
GAMMA	￿	￿
	#6 CUSTOM	#3 CUSTOM
	￿	￿
	#5 DEFAULT ￿ #5 CUSTOM ￿ #4 DEFAULT ￿ #4 CUSTOM
	To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
	in GAMMA and COLOR TEMP" (	28).
	Using the ▲/▼ buttons switches the color temperature mode.
	#1 HIGH DEFAULT ￿ #1 HIGH CUSTOM ￿ #2 MID DEFAULT
	￿	￿
	#6 Hi-BRIGHT-3 CUSTOM	#2 MID CUSTOM
	￿	￿
COLOR TEMP	#6 Hi-BRIGHT-3 DEFAULT	#3 LOW DEFAULT
	￿	￿
	#5 Hi-BRIGHT-2 CUSTOM	#3 LOW CUSTOM
	￿	￿
	#5 Hi-BRIGHT-2 DEFAULT ￿ #4 Hi-BRIGHT-1 CUSTOM ￿ #4 Hi-BRIGHT-1 DEFAULT
	To adjust the "CUSTOM" modes, see "To adjust CUSTOM function
	in GAMMA and COLOR TEMP" (	28).
	Using the ▲/▼ buttons adjusts the strength of whole color.
COLOR	Strong Ù Weak
	• This item can be selected only for a video signal, s-video or
	component video signal.
	Using the ▲/▼ buttons adjusts the tint.
TINT	Greenish Ù Reddish
	• This item can be selected only for a video signal, s-video or
	component video signal.

(continued on next page)

ViewSonic 26 PJ758/PJ759/PJ760