ViewSonic PJ758/PJ759/PJ760 manual MyScreen registration is finished

SCREEN Menu

SCREEN Menu (continued)

Item

Description

	This item allows you to capture an image for use as a MyScreen
	image which can be used as the BLANK screen and START UP
	screen. Display the image you want to capture before executing the
	following procedure.
	1. Selecting this item displays a dialog
	titled “MyScreen”. It will ask you if
	you start capturing an image from
	the current screen.
	Please wait for the target image to be displayed, and press the
	ENTER button when the image is displayed. The image will
	freeze and the frame for capturing will appear.
	To stop performing, press the RESET or ESC button.
	2. Using the ▲/▼/◄/► buttons adjusts
	the frame position.
	Please move the frame to the position
	of the image which you want to use.
MyScreen	The frame may not be able to be
	moved for some input signals.
	To start registration, press the ENTER
	button.
	To restore the screen and return to
	the previous dialog, press the RESET
	or ESC button.
	Registration takes several minutes.
	When the registration is completed, the registered screen and
	the following message are displayed for several seconds:
	“MyScreen registration is finished.”
	If the registration failed, the following message is displayed:
	“A capturing error has occurred. Please try again.”
	• This function cannot be selected when the TURN ON is selected
	to the MyScreen Lock item ( below).
	• This function cannot be selected when TURN ON is selected to
	the MyScreen PASSWORD of SECURITY item in OPTION menu
	( 46).

Using the ▲/▼ buttons turns on/off the MyScreen lock function.

TURN ON Ù TURN OFF

When the TURN ON is selected, the MyScreen item is locked. Use MyScreen Lock this function for protecting the current MyScreen.

•This function cannot be selected when TURN ON is selected to the MyScreen PASSWORD of SECURITY item in OPTION menu ( 46).

(continued on next page)

ViewSonic 38 PJ758/PJ759/PJ760